291-M

BERG Drawbar Force Gauges

BERG Drawbar Force Gauges (Click image to enlarge)
BERG Drawbar Force Gauges (Click image to enlarge)

The BERG clamping force measuring system for the tool holders is designed for force measurement when the spindle is stationary! The measuring system consists of a handy sturdy display device in pocket calculator format and the measuring equipment required for the various application. The measured data can be transferred to any WIN 9x/NT PC via a serial standard inter face and represented in y/t. The measuring system includes a practical case for accommodating the display device, the measuring equipment, the charger and the connecting cable.

PDF Data Sheet: BERG Drawbar Force Gauges (291-M)

The BERG clamping force measuring system for the tool holders is designed for force measurement when the spindle is stationary! The measuring system consists of a handy sturdy display device in pocket calculator format and the measuring equipment required for the various application. The measured data can be transferred to any WIN 9x/NT PC via a serial standard inter face and represented in y/t. The measuring system includes a practical case for accommodating the display device, the measuring equipment, the charger and the connecting cable.


Sensing Device M-SKThe sensing devices M-SK measure the clamping forces in steep taper (SK) following DIN 6987/1, ISO 7388/1. The standard handheld display supports all different sensing cartridges. It needs just to fit the correct pull stud into the cartridge corresponding to the different standards (DIN, ANSI, JIS, MAS). Steep taper standards away from the DIN 6987/1, ISO 7388/1 may need special adapting pull studs.

Sensing Device M-HSKThe sensing devices M-HSK measure the clamping forces in hollow shaft tool holders (HSK) following DIN 69839. The standard handheld display supports all different
sensing cartridges.

Sensing Device M-CaptoThe sensing devices M-Capto measure the clamping forces in Coromant Capto tool holders. The standard handheld display supports all different sensing cartridges.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BERG Drawbar Force Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Machine-Integrated Drawbar Force Gauges
Machine-Integrated Drawbar Force Gauges

The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.

Workholding Collet Drawbar Force Gauge
Workholding Collet Drawbar Force Gauge

ForceCheck collet force gauges measure the drawbar pullback force of a 5C, 16C, or 20C collet workholding system. Measurement of collet drawbar force provides an easy way to ensure correct force from machine to machine, or between setups for different parts.

Kennametal (KM Taper) Drawbar Force Gauges
Kennametal (KM Taper) Drawbar Force Gauges

Measuring bars, complete sets, and base units for measuring drawbar force on a Kennametal KM spindle.

Steep Taper (ISO) Drawbar Force Gauges
Steep Taper (ISO) Drawbar Force Gauges

Measuring bars, complete sets, and base units for measuring drawbar force on a Steep Taper (SK) ISO standard spindle.

PSK (PSC) Drawbar Force Gauges
PSK (PSC) Drawbar Force Gauges

Measuring bars, complete sets, and base units for measuring drawbar force on Coromant Capto spindles (Polygonal Shank Taper
- PSK).

Drawbar Clamping Force Gauges, Wired
Drawbar Clamping Force Gauges, Wired

Tool clamping force is often never measured after a machine is put into service. Regular verification allows problems to be detected early so maintenance and repairs can be scheduled. As a result, emergencies and unexpected downtime can be avoided. When troubleshooting, drawbar performance can quickly be verified.

HSK Drawbar Sensor Position Gauges
HSK Drawbar Sensor Position Gauges

Drawbar position gauges are used to adjust and set drawbar stroke position on HSK machine tool spindles. The gauges allow the clamping angle to be adjusted to the high and low limits, allowing the stroke position to be set.

Wireless Drawbar Force Gauges
Wireless Drawbar Force Gauges

The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger machines and hard-to-reach spindles are easier to check.

HSK Taper Drawbar Force Gauges
HSK Taper Drawbar Force Gauges

Measuring bars, complete sets, and base sets for all HSK type spindles. Contact us for other wireless and carrying case options.

Steep Taper (MAS 403 BT) Drawbar Force Gauges
Steep Taper (MAS 403 BT) Drawbar Force Gauges

Measuring bars, complete sets, and base sets for Steep Taper (MAS 403-BT) JIS standard.

Page loaded in 0.1275 seconds.