465.192.000.000
HSK Spindle Runout Test Arbors - HSK-A 125
For DIN 69893 / ISO 12164 Spindles
Full Data Sheet (465.100)
PDF Data Sheet: HSK Spindle Runout Test Arbors (465.100)| Taper | Length (L) | Diameter (D) | Standard | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| Custom | Contact us with your requirements | 465.100.SP | ||||||
| HSK-A/C/E 25 | 140 mm | 20 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.125.000.000 | ||||
| HSK-A/C/E 32 + B/D/F 40 | 180 mm | 24 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.132.000.000 | ||||
| HSK-A/C/E 40 + B/D/F 50 | 180 mm | 24 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.140.000.000 | ||||
| HSK-A/C/E 50 + B/D/F 63 | 346 mm | 32 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.150.000.000 | ||||
| HSK-A/C/E 63 + B/D/F 80 | 346 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.163.000.000 | ||||
| HSK-A/C/E 80 | 346 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.180.000.000 | ||||
| HSK-A/C 100 | 349 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.190.000.000 | ||||
| HSK-A/C 100 | 500 mm | 50 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.190.050.500 | ||||
| HSK-A 125 | 349 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.192.000.000 | ||||
| HSK-A 160 | 400 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.196.000.000 | ||||
| HSK-B 80 | 345 mm | 50 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.280.000.000 | ||||
| HSK-F 63 | 346 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.663.000.000 | ||||
| HSK-F 63 Short | 150 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.663.040.150 | ||||
| HSK-F 63 | 250 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.663.040.250 | ||||
| HSK-F 80 | 346 mm | 50 mm | Makino Flange-Pin Spindles | 465.680.000.000 |
Runout Arbor Upright Storage Cases
Our most popular case, the upright storage case protects a runout arbor from dirt and damage. The arbor rests vertically in the case, suspended from the flange. Upright storage of runout arbors is recommended
-- the upright case has foam guides that allow horizontal use if preferred. Case is available in tall and short configurations depending on arbor length. Case is made of 9 ply Baltic Birch.
| Part Number | ||||||||
|---|---|---|---|---|---|---|---|---|
| Runout Arbor Upright Storage Case, Tall | 465.002.000.000 | |||||||
| Runout Arbor Upright Storage Case, Short | 465.007.000.000 |
Heavy-Duty Runout Arbor Travel Cases
The runout arbor travel case is designed for portability while protecting arbors. The case holds two arbors, with additional space for extra retention knobs, indicator, and a magnetic base. The case is virtually indestructible and waterproof. Can be used with padlocks for added security.
| Part Number | ||||||||
|---|---|---|---|---|---|---|---|---|
| Heavy-Duty Runout Arbor Travel Case | 465.001.000.000 |
Indicators and Bases
TAC Rockford offers a variety of magnetic bases and indicators for use with runout test arbors and other gauges.
Available as kits with storage case or individually.
For more information regarding this item (HSK Spindle Runout Test Arbors - HSK-A 125) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Spindle Runout Test Arbors
- Maximum runout error 0.003mm / 3 micron / 0.00012 inch.
- Carrying cases are not included. Visit Data Sheet 465.006 for available case styles.
- A certificate of accuracy is included. Traceable certificates available; contact us for details.
- Contact us for other lengths, tapers, and other special requirements.
HSK Standard Ball-End Runout Test Arbors
Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).
Steep Taper Standard Ball-End Runout Test Arbors
Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).
PSC / PSK Spindle Runout Test Arbors
Made to the ISO 26623 Standard. Maximum runout error 0.003mm / 3 micron / 0.00012”. A certificate of accuracy is included. Storage are cases not included.
Spindle Runout Test Arbors
-Maximum runout error 0.003mm / 3 micron / 0.00012 inch
-Cylindricity ≤ 0.002mm / 2 micron / 0.00008 inch
-Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).
-A certificate of accuracy is included. Traceable certificates available; contact us for details.
-Contact us for other lengths, tapers, and other special requirements.
KM Spindle Runout Test Arbors
- Maximum runout error 0.003mm [0.00012 in.]
- Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).
- A certificate of accuracy is included. Traceable certificates available; contact us for details.
- Contact us for other lengths, tapers, and other special requirements.
* ISO 26622 runout arbor tapers are compatible with machines using TS, XMZ (Mazak Integrex), and ATC. Flange may not be suitable for use with automatic tool changers.
KM Precision Ball-End Runout Test Arbors
Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).
Our 467 precision version feature an adjustment mechanism which allows for improved accuracy.
* ISO 26622 runout arbor tapers are compatible with machines using TS, XMZ (Mazak Integrex), and ATC. Flange may not be suitable for use with automatic tool changers.
HSK Precision Ball-End Runout Test Arbors
Our 467 precision version feature an adjustment mechanism which allows for improved accuracy when compared to our standard 466 ball arbors.
Morse Taper Spindle Runout Arbors
Morse taper runout arbors offer a quick and easy way to verify correct spindle runout for machines with Morse tapers. Included is a threaded spanner nut to facilitate removable from the Morse spindle.
Arbors are manufactured to standard DIN 229 with a metric thread. Contact us for different sizes or customized versions.
R8 Taper Spindle Runout Test Arbor
Standard R8 spindle runout test arbor with inch retention thread.
Runout <=0.003 micron (0.00012 inch)
Submit your feedback