6C8.308.C03.000

Adapter, C8 Spindle to C3 Tool

Capto PSK reducer adapter diagram

Zoom Enlarge Image

Capto PSK reducer adapter diagram

Reduction adapters for PSK/PSC (Polygonal Shank Taper / Polygonal Sided Cone)

For holding PSK tools according to ISO 26623-1, d1 = nominal size PSK.

Capto PSK reducer adapter diagram (Click image to enlarge)
Capto reducing adapters with axial clamping (Click image to enlarge)
Adapter, C8 Spindle to C3 Tool (Click image to enlarge)

Full Data Sheet (6C8.100)

PDF Data Sheet: PSK (PSC) Reducing Adapters (6C8.100)

Product Tool Holder
Part Type Adapter
Taper / Standard PSK
Taper Size C8
Adapted to Taper C3


Spindle Adapted to Taper Part Number
PSK C4   C3              6C8.304.C03.000
PSK C5   C3              6C8.305.C03.000
PSK C5   C4              6C8.305.C04.000
PSK C6   C3              6C8.306.C03.000
PSK C6   C4              6C8.306.C04.000
PSK C6   C5              6C8.306.C05.000
PSK C8  C3              6C8.308.C03.000
PSK C8   C4              6C8.308.C04.000
PSK C8   C5              6C8.308.C05.000
PSK C8   C6              6C8.308.C06.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Adapter, C8 Spindle to C3 Tool) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

KS Adapter Flanges
KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.

KS Adapter Flanges with Radial Alignment
KS Adapter Flanges with Radial Alignment

Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.

Tool Dynamic Preset Tool Balancing Systems
Tool Dynamic Preset Tool Balancing Systems

Balancing and presetting are key elements of modern manufacturing. It is obviously a good idea to combine these two procedures. The Tool Dynamic Preset is a perfect combination of Haimer's balancing technology. The tool is clamped in the high precision balancing spindle fitted with Haimer's proven adapter system. This saves time and increases accuracy because the tool does not have to be re-clamped.

HSK to Steep Taper Adapters
HSK to Steep Taper Adapters

Application: for holding steep taper tool holders in an HSK spindle.

KS Adapter Flanges for Short Spindles
KS Adapter Flanges for Short Spindles

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.

HSK-C Integrated Spindle Adapter Flanges
HSK-C Integrated Spindle Adapter Flanges


- With larger axial plane
- Includes clamping set
- Includes brass locking ring
- Includes indexing pin and retention screws

Mounting Nuts for HSK-A/C Interface Adaption
Mounting Nuts for HSK-A/C Interface Adaption

Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.

Page loaded in 0.134 seconds.