292-PCHACC

BERG Pallet Clamping Head Accessories

BERG Pallet Clamping Head Accessories (Click image to enlarge)
BERG Pallet Clamping Head Accessories (Click image to enlarge)

PDF Data Sheet: BERG Pallet Clamping Head Accessories (292-PCHACC)

Taper Rings (Accessories)
Application:
Tapered rings are intended for attachment to pallets, workpiece holders or devices. In conjunction with clamping bolts and the attendant clamping heads, they serve to clamp the machine elements shown above. In combination with the clamping heads, maximum repeat precision of the clamping position is achieved.

Design Features:
The tapered rings are designed according to the geometry and clamping forces of the assigned clamping heads. The conical surfaces with a hardness greater than 60 HRC and the special hardness depth are insensitive to any type of soiling.

Pull Studs (Accessories)
Application:
Pull studs are intended to be screwed into pallets, workpiece holders or devices. In conjunction with tapered rings and the attendant clamping heads, they serve to clamp the machine elements shown above.

Design Features:
The clamping bolts are designed according to the clamping forces of the assigned clamping heads. Their surface qualities, hardness and mechanical strength properties meet the values specified in the tool standards.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BERG Pallet Clamping Head Accessories) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

NAB Pull Studs
NAB Pull Studs

Pull studs are the interface between devices, pallets and the clamping systems of the machine tool. For applications with two, four or more clamping heads, solid bolts are used for center position, sword bolts are used to determine the angled position and retaining bolts are exclusively used for vertical positioning. Versions are available for both front and rear installation.

Parallel to the applications of the BERG clamping heads with support cone, screw-in bolts are available as solid bolts and retaining bolts with screw thread. These are used for very high drawing-in forces and maximum stability in a minimum amount of space.

NSM-HV Zero Point Clamping System
NSM-HV Zero Point Clamping System

NSM-HV series zero point clamping heads are used for workholding pallet clamping as well as other applications on machine tools. With the clamping heads and matching retention bolts, extremely tight tolerance clamping position repeat precision can be achieved.

NSM-PV Zero Point Clamping System
NSM-PV Zero Point Clamping System

NSM PV zero point clamping heads are used for fixture and pallet clamping on machine tools. With the clamping heads and the associated clamping bolts provide for the highest levels of clamping position repeatability. Due to the mechanical integrated booster and lock, the clamping head is also suitable for pallets, tombstones, pivot tables and vertical applications. The chuck can be configured as double, 4-fold and custom multi-application.

SPH Pallet Clamping Heads
SPH Pallet Clamping Heads

BERG Spanntechnik series SPH clamping heads are primarily used for horizontal pallet clamping. The heads form the basis of a highly rigid, high precision repeatable workholding solution. In addition to clamping heads, non-active units are available for setup and storage stations. Heads are supplied as a matched set with 0.005mm accuracy.

SPH-V Pallet Clamping Heads
SPH-V Pallet Clamping Heads

Clamping heads of the series SPH-V are principally used in machining centers for vertical pallet clamping. The series SPH-V is based on the basic principle of the SPH. The additional internal self-locking system retains the clamping force even when hydraulic pressure is not present. It is possible to machine workpieces on a vertical pallet after clamping without a hydraulic connection
- without any reduction in safety!

SPM-HV Pallet Clamping Heads
SPM-HV Pallet Clamping Heads

SPM-HV series pallet clamping heads are used for pallet clamping on single or double axis indexing tables. With the clamping heads and matching tapered rings, maximum workpiece position repeatability and precision is possible.

Hydrodock System
Hydrodock System

Hydrodock units form the basis of a very compact and flexible clamping system. They were originally conceptualized as for head change systems on large machining centers, but also find applications in diverse areas such as injection molding machines.

Page loaded in 0.1022 seconds.