455.110.680.000
HSK-F80 80 Master Setting Gauges
Full Data Sheet (455.100)
PDF Data Sheet: HSK Master Setting Gauges (455.100)| Taper | L (mm) | D (mm) | f1 (mm) | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E/T 25 | Contact us | 455.110.125.000 | ||||||
| HSK-A/C/E/T 32 | Contact us | 455.110.132.000 | ||||||
| HSK-A/C/E/T 40 | 60 | 40 | 27 | 455.110.140.000 | ||||
| HSK-A/C/E/T 50 | 70 | 50 | 35 | 455.110.150.000 | ||||
| HSK-A/C/E/T 63 | 80 | 63 | 45 | 455.110.163.000 | ||||
| HSK-A/C/E/T 80 | 80 | 80 | 50 | 455.110.180.000 | ||||
| HSK-A/C/T 100 | 85 | 100 | 60 | 455.110.190.000 | ||||
| HSK-A/C/T 125 | 90 | 125 | 75 | 455.110.192.000 | ||||
| HSK-F63 63 | 80 | 63 | 45 | 455.110.663.000 | ||||
| HSK-F80 80 | 80 | 80 | 50 | 455.110.680.000 |
For more information regarding this item (HSK-F80 80 Master Setting Gauges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Certified Master Taper Gauge
These taper master gauges can be used for zeroing the dial indicators on our HSK Tool Holder Inspection Gauges.
HSK Tool Changer Alignment Gauges
Available for HSK-A 25, 32, 40, 50, 63, 80, 100, 125, and 160. Includes padded storage case.
HSK Dial Indicator Spindle Taper Gauge Manual
Instruction manual for the dial indicator spindle taper gauge (410.310)
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.
Tool Holder Taper Check Gauges
<b>This product has been replaced by gauge 430.124.</b> <a href="http://tacrockford.com/product/gauges/tool-holder-taper/steep-taper/tool-holder-taper-inspection-gauges/">Click here to link to this product.</a>
<b>Features</b>
-Maximize tool life and spindle life
-Ensure tool holder performance
-Tool holder can be tested with components assembled, and works with retention knob installed
-Includes (A) and (B) indicators with 0.0001" resolution
-Carbide locating pins for long life
-Made with hardened tool steel body
-Comes with master shank (C)
Series 968 HSK Tool Holder Taper Gauges
Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.
Submit your feedback