410.211
Series 968 HSK Tool Holder Taper Gauges
Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.
PDF Data Sheet: Series 968 HSK Tool Holder Taper Gauges (410.211)
| Taper | Diameter | Part Number | ||||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E 25 | 19 | 410.211.125.000 | ||||||
| HSK-A/C/E 32 | 24 | 410.211.132.000 | ||||||
| HSK-A/C/E 40 | 30 | 410.211.140.000 | ||||||
| HSK-A/C/E 50 | 38 | 410.211.150.000 | ||||||
| HSK-A/C/E 63 | 48 | 410.211.163.000 | ||||||
| HSK-A/C/E 80 | 60 | 410.211.180.000 | ||||||
| HSK-A/C/E 100 | 75 | 410.211.190.000 |
Standard unit offers simultaneous measurement of HSK taper dimensions d2 and dk. Includes 410.145 series High Precision Gauge Master.
Additional available options include:
- Tool change flange verification (d11/f3)
- 30 deg. clamping angle and knockout surface verification (d5/l5 and l6)
- Runout verification (A, B, C)
For more information regarding this item (Series 968 HSK Tool Holder Taper Gauges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Series 410 Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.
Tool Holder Taper Inspection Gauge
Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60) The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish. Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose. The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.
Morse Tool Holder Taper Sleeve Gauges
TAC Rockford Morse tool holder taper gauges are for inspection of Morse tool holder tapers. Gauges made from a hardened gauge steel, and include a certificate. Manufactured per DIN 229.
Lathe Spindle Face Ring
Series 492.026 ring gauges are for lathe spindle face.
Tool Holder Taper Check Gauges
<b>This product has been replaced by gauge 430.124.</b> <a href="http://tacrockford.com/product/gauges/tool-holder-taper/steep-taper/tool-holder-taper-inspection-gauges/">Click here to link to this product.</a> <br><br> <b>Features</b> <ul> <li>Maximize tool life and spindle life</li> <li>Ensure tool holder performance</li> <li>Tool holder can be tested with components assembled, and works with retention knob installed</li> <li>Includes (A) and (B) indicators with 0.0001" resolution</li> <li>Carbide locating pins for long life</li> <li>Made with hardened tool steel body</li> <li>Comes with master shank (C)</li> </ul> <br>
Series 15595.237 Mounting Fixtures
Series 15595.237 tool holder mounting fixtures provide both horizontal and vertical fixturing. Available for PSK/PSC, HSK, and Steep Taper.
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.
KM Tool Changer Alignment Gauges
<html> Tool changer alignment gauges verify proper alignment between the tool changer spindle. Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder. In addition, mis-clamping and dropped tools can also occur. <br><br> KM gauges are available for ISO 26622 as well as Mazak Integrex flanges. <br><br> Sets include taper and flange, axial and radial alignment pins, and a padded carrying case. </html>
Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
Submit your feedback