455.110.K63.IGX
KM Master Setting Gauges - KM63 (Integrex)
Full Data Sheet (455.K00)
PDF Data Sheet: KM Master Setting Gauges (455.K00)| Taper | lg (mm) | Dg (mm) | fg (mm) | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| KM40 (ISO 26622) | 50 | 40 | 27 | 455.110.K40.000 | ||||
| KM50 (ISO 26622) | 60 | 50 | 35 | 455.110.K50.ISO | ||||
| KM63 (Integrex) | 65 | 63 | 45 | 455.110.K63.IGX | ||||
| KM63 (ISO 26622) | 65 | 63 | 45 | 455.110.K63.ISO | ||||
| KM6350 | 65 | 63 | 45 | 455.110.K65.000 | ||||
| KM80 (TS, ISO 26622) | 80 | 80 | 50 | 455.110.K80.ISO |
For more information regarding this item (KM Master Setting Gauges - KM63 (Integrex)) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Certified Master Taper Gauge
These taper master gauges can be used for zeroing the dial indicators on our HSK Tool Holder Inspection Gauges.
KM Tool Changer Alignment Gauges
Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder.
In addition, mis-clamping and dropped tools can also occur.
KM gauges are available for ISO 26622 as well as Mazak Integrex flanges.
Sets include taper and flange, axial and radial alignment pins, and a padded carrying case.
Tool Holder Taper Check Gauges
<b>This product has been replaced by gauge 430.124.</b> <a href="http://tacrockford.com/product/gauges/tool-holder-taper/steep-taper/tool-holder-taper-inspection-gauges/">Click here to link to this product.</a>
<b>Features</b>
-Maximize tool life and spindle life
-Ensure tool holder performance
-Tool holder can be tested with components assembled, and works with retention knob installed
-Includes (A) and (B) indicators with 0.0001" resolution
-Carbide locating pins for long life
-Made with hardened tool steel body
-Comes with master shank (C)
KM Taper Identification
Kennametal's KM tooling system comes in several different varieties. The size is defined by the tool change flange diameter. For example, KM63 holders have a 63mm diameter flange.
Types include KM ISO (KM TS™), KM XMZ™, KM 4X™, KM NTC, and KM ATC™
Download our identification guide below.
HSK Dial Indicator Spindle Taper Gauge Manual
Instruction manual for the dial indicator spindle taper gauge (410.310)
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.
Submit your feedback