6C8.306.C05.000
Adapter, C6 Spindle to C5 Tool
Reduction adapters for PSK/PSC (Polygonal Shank Taper / Polygonal Sided Cone)
Full Data Sheet (6C8.100)
PDF Data Sheet: PSK (PSC) Reducing Adapters (6C8.100)| Product | Tool Holder |
| Part Type | Adapter |
| Taper / Standard | PSK |
| Taper Size | C6 |
| Adapted to Taper | C5 |
| Spindle | Adapted to Taper | Part Number | ||||||
|---|---|---|---|---|---|---|---|---|
| PSK C4 | C3 | 6C8.304.C03.000 | ||||||
| PSK C5 | C3 | 6C8.305.C03.000 | ||||||
| PSK C5 | C4 | 6C8.305.C04.000 | ||||||
| PSK C6 | C3 | 6C8.306.C03.000 | ||||||
| PSK C6 | C4 | 6C8.306.C04.000 | ||||||
| PSK C6 | C5 | 6C8.306.C05.000 | ||||||
| PSK C8 | C3 | 6C8.308.C03.000 | ||||||
| PSK C8 | C4 | 6C8.308.C04.000 | ||||||
| PSK C8 | C5 | 6C8.308.C05.000 | ||||||
| PSK C8 | C6 | 6C8.308.C06.000 |
For more information regarding this item (Adapter, C6 Spindle to C5 Tool) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
KS Adapter Flanges
Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100
KS Adapter Flanges with Angular Alignment
For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges with Angular Alignment
Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges with Radial Alignment
Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.
Tool Dynamic Preset Tool Balancing Systems
Balancing and presetting are key elements of modern manufacturing. It is obviously a good idea to combine these two procedures. The Tool Dynamic Preset is a perfect combination of Haimer's balancing technology. The tool is clamped in the high precision balancing spindle fitted with Haimer's proven adapter system. This saves time and increases accuracy because the tool does not have to be re-clamped.
HSK to Steep Taper Adapters
Application: for holding steep taper tool holders in an HSK spindle.
KS Adapter Flanges for Short Spindles
With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.
HSK-C Integrated Spindle Adapter Flanges
- With larger axial plane
- Includes clamping set
- Includes brass locking ring
- Includes indexing pin and retention screws
Mounting Nuts for HSK-A/C Interface Adaption
Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.
Submit your feedback