685.AXS
HSK Manual Clamping Grippers with Axial Drive
The Axialspanner comes for clamping disc-shaped tools (grinding wheels, saw blades) on HSK-flanges used. With low tension moments high clamping forces are generated, which are more than 50% above the recommended for HSK shanks values. Depending on the application of the AXS is centrally operated from the front through a tool flange or from the rear through the spindle.
PDF Data Sheet: HSK Manual Clamping Grippers with Axial Drive (685.AXS)
| HSK-A | HSK-B | Key Size | Torque | Force | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E 32 | HSK-B/D/F 40 | 3 | 6 Nm | 12 kN | 685.AXS.032.B00 | |||
| HSK-A/C/E 40 | HSK-B/D/F 50 | 4 | 11 Nm | 16 kN | 685.AXS.040.B00 | |||
| HSK-A/C/E 50 | HSK-B/D/F 63 | 5 | 18 Nm | 24 kN | 685.AXS.050.B00 | |||
| HSK-A/C/E 63 | HSK-B/D/F 80 | 6 | 24 Nm | 30 kN | 685.AXS.063.B00 | |||
| HSK-A/C/E 80 | HSK-B/D/F 100 | - | - | - | 685.AXS.080.B00 | |||
| HSK-A/C/E 100 | HSK-B/D/F 125 | - | - | - | 685.AXS.100.B00 |
For more information regarding this item (HSK Manual Clamping Grippers with Axial Drive) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Axial-Clamping Manual Clamping Grippers
The Axial pliers Spanner is a manual HSK-tensioners with axially in the center lying indirect drive, which is accessible both from the front and from behind. It is particularly suitable for clamping of HSK, especially grinding wheel shots, with the AZS can be integrated into the hub of a wheel on the one hand, (HSK arranged vice versa
- the spindle is the father) on the other hand, as usual, can be incorporated into the spindle using flange.
Rear-Clamp Manual Clamping Cartridges
355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.
Steep Taper Grippers SSKE-KH
SSKE-KH grippers are designed for applications requiring a shorter drawbar stroke.
HSK Grippers HSS and HSSL
The BERG Spanntechnik HSS gripper has been replaced by the HK and HKR. Replacement grippers are available for existing machines.
Capto Clamping Systems
BERG Spanntechnik is a leading supplier of Capto grippers and clamping systems.
Mounting Nuts for HSK-A/C Interface Adaption
Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.
Steep Taper Grippers SSKF
With an easy-to-machine spindle contour, BERG Spanntechnik SSKF gripper is designed for cost-sensitive applications.
Submit your feedback