230.203

BKW Control Cabinet Coolers

Control Cabinet Cooler for cover and lateral attachment

Electronic control systems are prone to malfunctions if exposed to high temperatures. The cooling is often performed by the blowing-in of external air or via indirect air/air heat exchangers without filters. As these systems always work according to the actual air temperature, the cooling performance is often unsatisfactory, especially during the hot season. The Control Cabinet Cooler has been constructed on the basis of 20 years of experience in refrigeration technology and tens of thousands of industrial cooling plants built for all kinds of applications. The cooling equipment is a unit ready for instant connection, and just an opening needs to be provided in the control cabinet for its installation. The equipment designed according to 19" technology is conceived as ready-to-install units for the standard control cabinets.

PDF Data Sheet: BKW Control Cabinet Coolers (230.203)

Cooling capacity 320-5000 Watt
Electronic control systems are prone to malfunctions if exposed to high temperatures. The cooling is often performed by the blowing-in of external air or via indirect air/air heat exchangers without filters. As these systems always work according to the actual air temperature, the cooling performance is often unsatisfactory, especially during the hot season. The Control Cabinet Cooler has been constructed on the basis of 20 years of experience in refrigeration technology and tens of thousands of industrial cooling plants built for all kinds of applications. The cooling equipment is a unit ready for instant connection, and just an opening needs to be provided in the control cabinet for its installation. The equipment designed according to 19" technology is conceived as ready-to-install units for the standard control cabinets.

The powerful, fully hermetical refrigeration compressor is mounted in a vibration-dampened manner blocking the transmission of any vibrations to other devices or equipment. Two axial fans (from SK180 a radial fan) ensure the ventilation of both the condenser and the evaporator and guarantee an efficient ventilation of the control cabinet. This cooling system also dehumidifies the air inside the control cabinet, which is particularly important in subtropical regions. The equipment has a sponge rubber seal at the side pointing to the control cabinet which ensures a perfect sealing-off of the inside from the outside. High reliability of operation, as is known from household refrigerators, is achieved owing to the use of components having proved their worth in millions of applications. To round off our delivery program, we also supply control cabinet coolers in ASL air/air design and water-cooled Control Cabinet Coolers ASWI ESW and AHW.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BKW Control Cabinet Coolers) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Water Re-Coolers
Water Re-Coolers

Including a fully hermetical cooling agent compressor for the cooling of clean water, glycol mix or emulsion. A powerful water pump (WRK30-100 made of stainless steel), a container and a complete electrical control system are incorporated. The special evaporator allows preliminary water temperatures of up to approx. 2 degrees C without anti-freezer. Even complete freezing will not cause any defects or total failure. Avoid excessive expenses for cooling water and complicated installations by using a sophisticated installation system, and use Water Re-Coolers made by BKW instead.

Immersion Liquid Re-Coolers
Immersion Liquid Re-Coolers

No additional space required thanks to the possibility of positioning the Immersion Re-Cooler onto the oil or liquid container. Large-surface evaporator made of standard steel or stainless steel 1.4301. Condenser extremely dirt-resistant. Owing to an approximately 5 times larger surface than the surface of the corresponding Continuous Cooling Plant, this equipment offers a high transmission value and efficiency even if the flow speed is low.

Mini Water Cooler
Mini Water Cooler

The BKW Mini Water Color can be used for many diverse applications. Some examples include welding machinery, Laser-Plasma installations, electron microscopes, X-ray tubes, hydraulic systems, plastic molding machinery, spindles, motors, cleaning and degreasing installations, as well as numerous other applications.

Continuous Re-Cooling Power Units
Continuous Re-Cooling Power Units

The Re-Cooling Plant is easy to open for cleaning in applications where contaminated materials are processed. The lateral air aspiration device for the condenser is positioned at the top, which makes the dirt accumulations inside the condenser easy to see and, thus, easy to clean. Upon request, it is available with an air filter fitted to the condenser.

Heat Exchangers
Heat Exchangers

These cooling systems facilitate the cooling of oils and other media (with BKW equipment even contaminated media). Water is supplied at the front inlet side from the internal side of the tubes while the medium to be cooled flows in from the jacket.

Overview: Clamping Systems with AS-Interface
Overview: Clamping Systems with AS-Interface

The BERG AS-Interface clamping and chucking systems are intended for clamping various tools/dies on press slides and black holders, and for sliding table clamping and gripper rail couplings on multiple die presses. They are used on new machines and for retrofitting automatic clamping systems in existing press lines.

Hydraulic Power Stations for Hydraulic Quick Die Clamping Systems
Hydraulic Power Stations for Hydraulic Quick Die Clamping Systems

Hydraulic power stations for quick die clamping systems are designed for actuating hydraulic clamping elements in the forming presses. A large number of electro-hydraulic (HA) or air-hydraulic power stations (HAL) are available depending on the use of the clamping elements and/or hydraulics on the press plunger or on the table, as well as the number of clamping elements.

Tall Cabinets
Tall Cabinets

The two robust steel cabinet options are designed for easy access and secure storage of tools and equipment. Both are equipped with roller shutters for safety and space saving in the machine shop or tool setting area.

HSK-A Quick-Change Solid Drive Tapping Chucks
HSK-A Quick-Change Solid Drive Tapping Chucks

For synchronized feed control machines. Available for HSK-A 63, 80, 100.

Page loaded in 0.1105 seconds.