293-PV
BERG Self-Traveling Clamping Systems
Electromechanical PSP...VL/PLV Clamp for die clamping on slides. The clamp automatically travels between the park position and the actual die, guided by the T-slot of the slide. The bell-crank lever covers a wide clamping range.
PDF Data Sheet: BERG Self-Traveling Clamping Systems (293-PV)
PSP ... VLE / PSV / AS-IElectromechanical Clamping System Bellcrank Lever Style
The electro-mechanical, self-locking die clamping system PSP ...VLE/PSV/AS-I is designed for clamping dies of different widths on press slides. The clamping systems are controlled decentrally and individually in each clamping system. Each local clamp control system communicates with the forming machine control system via the AS-I BUS. The clamping actuator automatically moves into the T-groove of the press slide between the park position and the respective die. The electro-mechanical clamping system clamps the die and switches off automatically on reaching the clamping force.
PSP ... VL / PLVElectromechanical Clamping System Bellcrank Lever Style
Electromechanical PSP...VL/PLV Clamp for die clamping on slides. The clamp automatically travels between the park position and the actual die, guided by the T-slot of the slide. The bell-crank lever covers a wide clamping range.
PSP ... VK / PLVElectromechanical Clamping System Wedgebar Style
Electromechanical PSP...VK/PLV Clamp for die clamping on slides. The clamp automatically travels between the park position and the actual die, guided by the T-slot of the slide. In park position the clamp is safety locked by the wedge jaw.
PSP ... E / PSV / AS-IElectromechanical Clamping System Drawbar Style
The electro-mechanical, self-locking PSP...E/PSV/AS-I is designed for clamping dies of different widths with clamping slot on press slides. The clamping systems are controlled decentrally and individually in each clamping system. Each local clamp control system communicates with the forming machine control system via the AS-I BUS. The clamping actuator automatically moves into the T-slot of the press slide between the park position and the respective die. The electro-mechanical clamping system clamps the die and switches off automatically on reaching the clamping force.
BKZ ... / PSV (AS-I)Hydraulic Clamping System Drawbar Style
The hydraulic die clamping system BKZ./PSV is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Hydraulic pressure is in maximum 400 bar / option 245bar version. The BUS controlled version BKZ.../PSV/AS-I with AS interface is available as an alternative.
BKZ ... D / PSV (AS-I)Hydraulic Clamping System Drawbar Style
The hydraulic die clamping system BKZ ...D/PSV is designed for clamping dies of different widths on press slides. The clamping drive moves automatically into the T-slot of the press plunger between the park position and the respective die. The clamping element can clamp different clamping rim heights due to the long clamping stroke of the double acting cylinder. The clamping pressure is 400 bar. The BUS controlled version BKZ ...D/PSV/AS-I with AS interface is available as alternative.
BKZ C ... / PSV (AS-I)Hydraulic C-Clamping System
The hydraulic die clamping system BKZ C./PSV is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Hydraulic pressure is in maximum 400 bar. The BUS controlled version BKZ C.../PSV/AS-I with AS interface is available as an alternative.
BKZ ... / PKVThe Clamping Actuator with Push Pull Chain
The hydraulic die clamping system BKZ./PKV is designed for clamping dies of various widths on press slides. The push pull chain actuator moves automatically in the T-slot of the press slide between the park position and the respective die. The push pull chain actuator can be used alternative to the PSV/PLV clamping actuator for every Berg clamping system.
PSP ... T / PSV (AS-I)Mechanical Clamping System Disk Spring Washer Style
The mechanical die clamping system PSP...T/PSV is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Clamping is performed by Belleville spring washers; hydraulic unclamping. The BUS controlled version PSP...T/AS-I with AS interface is available as an alternative.
Hydrolock ... / PSV (AS-I)Hydromechanical Clamping System Drawbar Style
The hydromechanical selflocking die clamping system Hydrolock .../PSV is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Clamping and unclamping are performed by a hydromechanical selflocking clamping gear. Hydraulic pressure is in maximum 90 bar. The BUS controlled version Hydrolock...PSV/AS-I with AS interface is available as an alternative.
Hydrolock C ... / PSV (AS-I)Hydromechanical C-Clamping System selflocking
The hydromechanical selflocking die clamping system Hydrolock C.../PSV is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Clamping and unclamping are performed by a hydromechanical selflocking clamping gear. Hydraulic pressure is in maximum 90 bar. The BUS controlled version Hydrolock C.../PSV/AS-I with AS interface is available as an alternative.
For more information regarding this item (BERG Self-Traveling Clamping Systems) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Capto Clamping Systems
BERG Spanntechnik is a leading supplier of Capto grippers and clamping systems.
Automatic Hydraulic Push Drive Chain-type Clamping Systems
The push drive chain-type hydraulic die clamping system is designed for clamping dies of various widths on press slides. The push-pull chain actuator moves automatically in the T-slot of the press slide between the parking position and the respective die. Hydraulic pressure is at a maximum 400 bar. The push-pull chain actuator can be used alternative to the PSV/PLV clamping actuator for every BERG press clamping system.
Automatic Electromechanical Drawbar Style Clamping Systems
The electro-mechanical self-locking drawbar style clamping system is designed for quick clamping dies of different widths with clamping slot on press slides.
The clamping systems are controlled de-centrally and individually in each clamping system. Each local clamp control system communicates with the pressing machine control system. The clamping actuator automatically moves into the T-slot of the press slide between the parking position and the respective die. The electro-mechanical clamping system clamps the die and switches off automatically on reaching the clamping force.
Automatic Hydraulic C-clamping Systems
The C-clamping hydraulic die clamping system is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Hydraulic pressure is at a maximum 400 bar
Automatic Hydro-mechanical Self-locking C-clamping Systems
The C-clamping hydromechanical self-locking (hydrolock) die clamping system is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the parking position and the respective die. Clamping and unclamping are performed by a hydromechanical self-locking clamping gear. Hydraulic pressure is at a maximum of 90 bar.
Overview: Clamping Systems with AS-Interface
The BERG AS-Interface clamping and chucking systems are intended for clamping various tools/dies on press slides and black holders, and for sliding table clamping and gripper rail couplings on multiple die presses. They are used on new machines and for retrofitting automatic clamping systems in existing press lines.
Automatic Electromechanical Bellcrank Lever Style Clamping Systems
Electromechanical clamp for die clamping on press slides. The clamp automatically travels between the parking position and the actual die, guided by the T-slot of the slide. The bell-crank lever covers a wider clamping range.
Automatic Electromechanical Wedgebar Style Clamping Systems
Electromechanical clamp for die clamping on press slides. The clamp automatically travels between the parking position and the actual die, guided by the T-slot of the slide. In parking position, the clamp is safely locked by the wedge jaw.
Automatic Hydro-mechanical Self-locking Drawbar Style Clamping Systems
The drawbar style hydromechanical (hydrolock) self-locking die clamping system is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the parking position and the respective die. Clamping and unclamping are performed by a hydromechanical self-locking clamping gear. Hydraulic pressure is at a maximum 90 bar.
Hydraulic Power Stations for Hydraulic Quick Die Clamping Systems
Hydraulic power stations for quick die clamping systems are designed for actuating hydraulic clamping elements in the forming presses. A large number of electro-hydraulic (HA) or air-hydraulic power stations (HAL) are available depending on the use of the clamping elements and/or hydraulics on the press plunger or on the table, as well as the number of clamping elements.
Submit your feedback