320.001
Gutekunst Spring Clips
Spring clips with a C in the front are made of CK 75 G without a galvanized surface plating. Upon request, we can offer galvanic surface. The spring clips with an X in the front are made of 1.4310 (stainless steel).
PDF Data Sheet: Gutekunst Spring Clips (320.001)Spring clips with a C in the front are made of CK 75 G without a galvanized surface plating. Upon request, we can offer galvanic surface. The spring clips with an X in the front are made of 1.4310 (stainless steel).
We can manufacture for you spring clips from the following materials:
1.4310, C 75 S, CuSn6, CuBe2 as well as any supplied special material
• The strip thickness ranges between 0.3 and 2.5 mm
• The strip width ranges between 5.0 and 60 mm
For more information regarding this item (Gutekunst Spring Clips) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Wire-Rope Clips with Spring-Operating Storage
Wire-rope clips for cable lifts and chair lifts for wire-rope diameters from 13-32 mm. Our wire-rope clips with spring-operating storage and pendular-break meet the highest demands concerning quality in the ski-lift industry. The clips are manufactured from highly forged heat-treated steel and therefore show the highest qualities concerning lifetime and wear. Because of design and state-of-the-art engineering this component features the highest ride comfort and operational safety.
Spring Band Steel
We supply spring band steel either as pre-cut blanks or in coils with thickness values of 0.1 to 3.0 mm and widths of 2.0
- 120 mm. Available materials:
1.4310, 1.4301, C 75 S, C 100 S, CuSn6, CuZn37 as well as CuBe2
Special Multi-Characteristic Springs
Röhrs special springs with two characteristics are a specialty, in which two spring characteristics are combined into one spring.
Spring Stacks
Spring stacks are used in machining spindles for mechanically generating the actuation force for the clamping means.
Spring Combinations and Sets
Whenever a single compression, tension and helical disk spring alone does not meet the requirements, we individually design spring combinations and spring sets for our customers. By this means, we achieve significant successes regarding spring loads, operational safety, durability and installation length.
Compression Springs Overview
Steel springs from Gutekunst are manufactured using spring steel wire material no.1.4310 in compliance with EN 10270 part 3 (AISI 302 / BS 301S21). The tolerances of the wire diameters comply with DIN 2076.
Square Springs
We are your specialists in the manufacturing of square springs for industrial use. Our standard springs are made of 1.4310 material with a wire thickness of 1.0 mm. Other materials and thickness values are available at request.
Helical Disk Spring Power Packs
This power pack is composed of a quadruplicated screwed together helical disk spring.
It is applied in hydrogen fuel cells featuring a high energy density for instance (e.g. satellites / submarines).
Bent Wire Parts
We use the following materials in any variant in manufacturing wire bent parts for our clients: 1.4310, 1.4301, 1.1200, plus any special material you may request or supply. We offer the following range of dimensions: wire thickness values of 0.2 to 4.0 mm.
Submit your feedback