683.510.060.080 HSK-C 80 VDI to HSK-C Basic Adapter Flanges

Zoom Enlarge Image

HSK-C 80 VDI to HSK-C Basic Adapter Flanges

Converts VDI DIN 69880-1 to HSK-C

- For fixed, centered tools - Includes clamping set - Includes brass locking ring

HSK-C 80 VDI to HSK-C Basic Adapter Flanges (Click image to enlarge)

Full Data Sheet (683.510)

PDF Data Sheet: VDI to HSK-C Basic Adapter Flanges (683.510)

Details Ask a Question Request a Quote

Product	Tool Holder
Part Type	Adapter Flange
Taper / Standard	HSK-C
Taper Size	80
DIN 69880-1 (VDI)	60
Length (l1)	100
d2	123
l2	62
SW	6

HSK-C Taper (d1)	DIN 69880-1 (VDI)	Length (l1)	d2	l2	SW	Part Number
HSK-C 63	40	80	83	50	5	683.510.040.063
HSK-C 63	50	80	98	50	5	683.510.050.063
HSK-C 80	50	100	98	70	6	683.510.050.080
HSK-C 80	60	100	123	62	6	683.510.060.080
HSK-C 100	60	125	123	87	8	683.510.060.100

For more information regarding this item (HSK-C 80 VDI to HSK-C Basic Adapter Flanges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

VDI to HSK-C Basic Adapter Flanges

- For fixed, centered tools
- Includes clamping set
- Includes brass locking ring

HSK-C Locking Rings for Adapter Flanges

Available for HSK-C 25, 32, 40, 50, 63, 80, 100

KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

VDI Lathe Turret Alignment Bars

Lathe turret alignment bar for VDI interface. Used for both testing concentricity of the interface as well as center alignment and adjustment on a lathe. Made to DIN 69880 standard.

465.V50.59767 is a special configuration used on certain Mazak machines. Contact us for further information.

Contact us for other sizes or special requirements/configurations.

Workbench Tool Mounting Fixtures

682.126 mounting fixtures have been discontinued. Link below for available alternatives.

Mounting unit partially pre-assembled, aluminum body, holding sleeve, swivel unit and clamping elements. Available for HSK, Capto PSK (PSC), Steep Taper (SK), and VDI.

KS Adapter Flanges with Angular Alignment

For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.