461.200.K90.000

ForceCheck KM100 Measuring Bar

Zoom Enlarge Image

KM50, KM63, & KM80 ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

KM50 & KM63 ForceCheck Sensors with display, cable and case (Click image to enlarge)

KM50 ForceCheck, Drawbar Force Sensor (Click image to enlarge)

Full Data Sheet (461.200.K)

PDF Data Sheet: KM Wired ForceCheck Sensors (461.200.K)

Details Ask a Question Request a Quote

Product	ForceCheck
Part Type	Measuring Bar
Taper / Standard	KM
Taper Size	100

ForceCheck Sensor, Wired								Part Number
KM 32								461.200.K32.000
KM 40								461.200.K40.000
KM 50								461.200.K50.000
KM 63								461.200.K63.000
KM4X 63								461.200.K63.04B
KM 6350								461.200.K65.000
KM 80								461.200.K80.000
KM 100								461.200.K90.000
KM4X 100								461.200.K90.04B
KM 10080								461.200.K98.000

For more information regarding this item (ForceCheck KM100 Measuring Bar) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Steep Taper (DIN) Drawbar Force Gauges

Measuring bars, complete sets, and base sets for Steep Taper (SK) DIN standard. Metric or inch retention knob / pull-stud threading available on each measuring bar.

Steep Taper (CAT/ANSI) Drawbar Force Gauges

Measuring bars, complete sets, and base sets for Steep Taper (SK) CAT-ANSI. Metric or inch retention knob / pull-stud threading available on each measuring bar.

Collet Force Gauges

Senso 3000 Hydraulic Tool Holder Force Gauge

The SENSO 3000 is a specialized tool for verifying correct operation of hydraulic tool holders. For workholding collet force gauges, please see our ForceCheck collet force gauges.

SENSO 3000 determines the clamping force of the hydraulic chuck via a pressure sensitive plug gauge. The entire length of the plug gauge is clamped in the hydraulic chuck so that when tightening the clamping screw the clamping pressure of the chuck is optimally applied. The clamping force measuring instrument displays the clamping force as an absolute measurement value on the one hand and as a percentage clamping force in relation to a reference value that can be set individually on the other. This way, SENSO 3000 can be adapted to customer specific application conditions and requirements.

The clamping force measuring instrument is supplied with a plug gauge for the respective clamping diameter as well as a carbide proofing bar for calibration purposes and a CR 2430 type battery – all in a sturdy and handy case.