530.100.190.000 HSK-A/C 100 Spindle Wipers

HSK-F Spindle Taper Wiper

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

Full Data Sheet (530.100.1)

PDF Data Sheet: HSK Spindle Wipers (530.100.1)

Details Ask a Question Request a Quote

Product	Accessory
Part Type	Spindle Taper Wiper
Taper / Standard	HSK-A/C
Taper Size	100

Taper								Part Number
HSK-A/C/E 25								530.100.125.000
HSK-A/C/E 32								530.100.132.000
HSK-A/C/E 40								530.100.140.000
HSK-A/C/E 50								530.100.150.000
HSK-A/C/E 63								530.100.163.000
HSK-A/C 80								530.100.180.000
HSK-A/C 100								530.100.190.000
HSK-A 125								530.100.192.000
HSK-F 63								530.100.663.000

For more information regarding this item (HSK-A/C 100 Spindle Wipers) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Morse Spindle Wipers

Capto/PSK/PSC Spindle Wipers

Steep Taper Spindle Wipers

KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

HSK Spindle Wipers

Axial Collet Clamping Grippers for HSK 100 Grinding Wheels

The AZS gripper is specially designed to manually mount heavy grinding wheels to a standard HSK 100 tool interface. The grinding wheel is mounted onto a HSK-style tool holder and is held to the spindle extremely accurately. The gripper allows very high clamping forces in a compact design. For example, the clamping force is 55 kN with a clamping torque of only 30 Nm for HSK 100. If needed, this AXS-100 gripper could be adapted for any HSK standard.

Mounting Nuts for HSK-A/C Interface Adaption

Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.