Used for cleaning the external taper and face.
|Taper||Length (l1)||Ø (d1)||Part Number|
For more information regarding this item (HSK Tool Holder Taper Wipers) or other items, fill out the form below
or contact our office directly:
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.
TAC Rockford Morse tool holder taper gauges are for inspection of Morse tool holder tapers. Gauges made from a hardened gauge steel, and include a padded carrying case and certificate. Manufactured per DIN 229.
Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.