687.5520

KS Adapter Flanges with Radial Alignment

Designed for module connection size MN5000-30

Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.

PDF Data Sheet: KS Adapter Flanges with Radial Alignment (687.5520)

Products Details Ask a Question Request a Quote

Nominal Size (HSK-C)	Module Diameter D1	D2	A	L1	kg	lb	Part Number
HSK-C 32	60	37	26	13	0.40	0.88	687.5520-05-K
HSK-C 40	70	45	30	15	0.60	1.32	687.5520-06-K
HSK-C 63	100	70	43	22	1.8		687.5520-08-K
HSK-C 80	117	87	50	29	2.7		687.5520-09-K

Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools.

DesignCan be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.

IncludesClamping cartridge, stop ring, and cylindrical screw (for holding KS adapter flange)

NoteOn request the adapter flanges can be supplied with KS clamping cartridge for use with minimal lubricationm (MQL).

For more information regarding this item (KS Adapter Flanges with Radial Alignment) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

KS Adapter Flanges for Short Spindles

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.

KS Adapter Flanges with Angular Alignment

For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.

KM Tool Changer Alignment Gauges

Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder.
In addition, mis-clamping and dropped tools can also occur.
KM gauges are available for ISO 26622 as well as Mazak Integrex flanges.
Sets include taper and flange, axial and radial alignment pins, and a padded carrying case.