HSK Flanges, Radial/Axial Adjustable

KS Adapter Flanges for Short Spindles

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.

KS Adapter Flanges with Radial Alignment

Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.

KM Tool Changer Alignment Gauges

Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder.
In addition, mis-clamping and dropped tools can also occur.
KM gauges are available for ISO 26622 as well as Mazak Integrex flanges.
Sets include taper and flange, axial and radial alignment pins, and a padded carrying case.

Hydrostatic Grinding Spindles

Radial Diameter: 24 mm
Maximum Speed: 35,000 RPM
Maximum Radial Load: 800 N
Radial Stiffness: 70 N/micro-m
Pump and Friction Power: 0.58 kW at 35,000 RPM

Steep Taper (CAT/ANSI) to HSK Adapters

Adapts from CAT / ASME (ANSI) B5.50 (standard taper) to DIN 69063 (HSK taper).

HSK-E/F CAM-Actuated Flanges

Series 363.048 flanges use a unique cam-actuated clamping cartridge that actuates behind the taper.

These flanges are intended for HSK-E/HSK-F tools that do not have drive keys on the taper, however they are also compatible with HSK-A/HSK-C.

KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

HSK Taper Adjustable Mounting Fixtures

The Adjustable Mounting Fixture from Transatlantic Connection rotates a full 360 degrees for easy access to all sides of the tool holder. Designed for bench-top mounting.