403.750.ServiceKit
Machine Tool Service Kits - Steep Taper 50 (BT) Service Kit
Includes common preventative maintenance gauges:
- ForceCheck Drawbar Force Gauge 461.310.750.000 (Complete set with measuring bar, display, and connecting cable)
- Spindle Runout Test Arbor 465.750.000.000
- Tool Changer Alignment Tool 440.135.750.000
- Spindle Taper Gauge 468.110.850.000
- Spindle Taper Wiper 530.100.850.000
- Includes customized storage cases for convenient storage and transport.
For more information regarding this item (Machine Tool Service Kits - Steep Taper 50 (BT) Service Kit) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Tool Holder Taper Inspection Gauge
Designed to detect tool holder taper wear in seconds.
The tool holder taper inspection gauge includes two Fixture Bases, two 0.001mm Indicators, and a carrying case. An optional 410.148 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a known good tool holder can be used in place of the master. Click the Details Tab for more information.
Drawbar Clamping Force Gauges, Wired
Tool clamping force is often never measured after a machine is put into service. Regular verification allows problems to be detected early so maintenance and repairs can be scheduled. As a result, emergencies and unexpected downtime can be avoided. When troubleshooting, drawbar performance can quickly be verified.
Indicators and Bases
TAC Rockford offers a variety of magnetic bases and indicators for use with runout test arbors and other gauges.
Available as kits with storage case or individually.
HSK Tool Changer Alignment Gauges
Available for HSK-A 25, 32, 40, 50, 63, 80, 100, 125, and 160. Includes padded storage case.
Steep Taper Tool Changer Alignment Gauges
Available for Steep Taper 30, 40, 50, and 60. Includes padded storage case.
PSC (PSK) Tool Changer Alignment Gauges
Available for Polygonal-Shank Taper sizes C3, C4, C5, C6, C8, C8X, C10. Includes padded storage case.
KM Tool Changer Alignment Gauges
Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder.
In addition, mis-clamping and dropped tools can also occur.
KM gauges are available for ISO 26622 as well as Mazak Integrex flanges.
Sets include taper and flange, axial and radial alignment pins, and a padded carrying case.
Submit your feedback