560.012.81

Laip Induction Shrink Fit and Cooling Devices

Especially designed for DIN 69882-8 shrink fit toolholders

Laip Induction Shrink Fit and Cooling Devices (Click image to enlarge)
Laip Induction Shrink Fit and Cooling Devices (Click image to enlarge)
Laip Induction Shrink Fit and Cooling Devices (Click image to enlarge)

Compact heat shrink system with fully integrated control, high frequency inductor, and cooling system.

PDF Data Sheet: Laip Induction Shrink Fit and Cooling Devices (560.012.81)

• Compact heat shrink system with fully integrated control, high frequency inductor, and cooling system.
• Automatic cooling by means of the turbulent air fluid.
• Only one induction coil for any tool diameter Ø 3 to Ø 32 mm.
• Automatic vertical movement of the inductor using a pneumatic cylinder and pressure control system.

Based on the laws of physics – expansion and contraction due to heating – a shrink fit system is the latest technology in cutter holding technology.

The inside bore diameter of a heat shrink tool holder is slightly smaller than the shank diameter of the tool. The induction heat shrink is used to quickly heat the tool holder, expanding the inside diameter and allowing the cutter to easily fit into the tool holder.

Once cooled, the tool holder and cutter behave as if they were made out of a single piece. Incredible concentricity and rigidity are achieved by the uniform pressure around the entire surface of the tool shank.

To remove the cutter, the process is reversed: the tool holder is again heated and expands to allow easy replacement of the cutter.

When the tool and tool holder are assembled, shrink fitting results in a very solid construction – without any extra parts, and with uniform pressure around the complete tool shank. This guarantees:
• Highest concentricity: Less than 3 microns.
• Safety: Highest torque transmission: 2-4 times more than a conventional collet chuck.
• Reliability.
• Repeatability.
• Excellent rigidity and less vibration.
• Smaller unit outside diameter – Easier access to difficult working areas.
• Reduced bulk, focused on high speed machining.
• Best strength transmission.
• Symmetrical external profile: ideal for high speed machining applications.

Advantages • Fast: High frequency inductor of 11 KW power assures a quick change. Heating time < 6 seconds, cooling time < 60 seconds.
• One induction coil: Only one coil for any tool diameter 0.125 to 1.250 in / 3 to 32 mm.
• Easy to use: Automatic stop on tool holder contact, one button for heating without selecting material or diameter of the tool, and automatic cooling using turbulent air fluid.
• Safe operation: No need to handle hot tool holders.
• Flexible and versatile: Independent of material or tool holder profile. Large capacity: up to 500-mm length tool holders. Power selector with two positions.
• Hands-free compact unit: One body containing electronic device, inductor, and cooling system.
• Economic: Increased productivity, longer tool life, and better surface finish.

Specifications • Induction shrink fit device with high frequency inductor.
• Time for heating < 6 seconds.
• Time for cooling 20, 30, or 40 seconds, with fluid and 60 or 120 seconds with air.
• Tool diameter Ø 3 to Ø 32.
• For all types of tools: HHS, Cermet Cabide with H4/H6. Tolerance and toolholders: HSK, DIN 69871, MAS-BT, etc.
• For any size of toolholder (HSK-50/63, SK-30/40, BT-35/40...).

Design • Compact unit containing electronic device, high frequency inductor and cooling system.
• Heating and cooling integrated.
• Automatic cooling by means of the turbulent air fluid.
• Just one induction coil for any tool diameter Ø 3 to Ø 32 mm.
• Vertical movement of the inductor by pneumatic cylinder and pressure control device.


Induction Shrink Fit DeviceComplete inductive-shrink fit with:
• Just one induction coil for any tool diameter Ø 3 to Ø 32 mm.
• Electronic device integrated.
• Cooling unit integrated.

Flange AdaptersAccording to customer needs, one of the following:
• BT-30 and HSK-32/40
• BT-35/40, HSK-50/63, and Steep Taper (DIN 69871) 30/40
• BT-45/50, HSK-80/100, and Steep Taper (DIN 69871) 45/50

Tool AdaptersComplete set containing:
• Tool adapter for Ø 6-8-10-12
• Tool adapter for Ø 14-16-18-20
• Tool adapter for Ø 25-32
• On request tool adapters Ø 3-4-5 and toolholders not in accordance with DIN 69882-8 standard

Applications • Finish cutting
• Heavy duty power machining
• High speed cutting
• Contour cutting in mould making
• Thread milling cutting
• Drilling
• Reaming
• Internal grinding
• Aluminum machining
• Wood processing
• Plastic machining


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Laip Induction Shrink Fit and Cooling Devices) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

GISS 2500 Induction Shrink Fit Systems
GISS 2500 Induction Shrink Fit Systems

Pre-setting, shrink fitting, and measuring, all possible with one system, the GISS 2500 shrink fit system. In addition to tool pre-setting and induction shrink fitting, it is capable of also measuring the shrink fitting tools thanks to an optical measuring unit and intelligent software.

GISS 3000 Induction Shrink Fit Systems
GISS 3000 Induction Shrink Fit Systems

For the first time GISS 3000 offers the operations shrink fitting, cooling, and high precision length pre-setting in one system. GISS 3000 is especially suitable for the automated production in multi-spindle machines and transfer lines in the automotive industry, in the aerospace industry as well as in volume production.

Power Clamp Preset Network Heat Shrink Systems
Power Clamp Preset Network Heat Shrink Systems

The Power Clamp Preset Network is based on the time-tested Power Clamp Preset. It is equipped with a PC that acts as the interface to your tool management and controls the shrink fit operation as well.

Power Clamp Premium Plus Heat Shrink Systems
Power Clamp Premium Plus Heat Shrink Systems

The Power Clamp Premium/Premium Plus is the shrink fit machine for perfectionists. The cooling bodies are fixed at linear guides. For the cooling process they are exactly centered put on the hot shrink fit chuck. The cool down phase is terminated temperature controlled automatically.

Power Clamp Premium Heat Shrink Systems
Power Clamp Premium Heat Shrink Systems

The Power Clamp Premium/Premium Plus is the shrink fit machine for perfectionists. The cooling bodies are fixed at linear guides. For the cooling process they are exactly centered put on the hot shrink fit chuck. The cool down phase is terminated temperature controlled automatically.

Power Clamp Shower Coolers
Power Clamp Shower Coolers

For rapid cooling of tools. Add-on for all shrink fit machines.
- Suitable for all contours
- Drying by rotating air nozzles
- Supplementing existing cooling systems
- Cooling time < 1 min.

Power Clamp Economic NG Heat Shrink Systems
Power Clamp Economic NG Heat Shrink Systems

High performance shrink fit machine for all tools.
- With intelligent NG coil
- Single chuck version
- Without cooling

Power Clamp Economic Heat Shrink Systems
Power Clamp Economic Heat Shrink Systems

High performance shrink fit machine for all tools.
- With standard coil
- Single chuck version
- Without cooling

Power Clamp Power Coolers
Power Clamp Power Coolers

The Power Cooler is a new cooling unit to cool down tool holders. An air stream interspersed with a fine water mist cools down the shrink fit chucks of any shape in record time.

Page loaded in 0.117 seconds.