530.100

Steep Taper Spindle Wipers

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

Steep Taper Spindle Wipers (Click image to enlarge)
Steep Taper Spindle Wipers (Click image to enlarge)

PDF Data Sheet: Steep Taper Spindle Wipers (530.100)

Print Data Sheet

Taper Part Number
Steep Taper 30                 530.100.830.000
Steep Taper 40                 530.100.840.000
Steep Taper 45                 530.100.845.000
Steep Taper 50                 530.100.850.000
Steep Taper 60                 530.100.860.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Steep Taper Spindle Wipers) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Steep Taper Spindle Plug Gauges
Steep Taper Spindle Plug Gauges

TAC Rockford gauges are used for inspection of steep taper spindle tapers per CAT, ISO, JIS, DIN, etc. Available for Steep Taper 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65

HSK to Steep Taper Adapters
HSK to Steep Taper Adapters

Application: for holding steep taper tool holders in an HSK spindle.

Steep Taper Spindle Gauge Manual
Steep Taper Spindle Gauge Manual

Download PDF for instruction manual.

Steep Taper Standard Ball-End Runout Test Arbors
Steep Taper Standard Ball-End Runout Test Arbors

Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).

Steep Taper Tool Changer Alignment Gauges
Steep Taper Tool Changer Alignment Gauges

Available for Steep Taper 30, 40, 50, and 60. Includes padded storage case.

Steep Taper Dual-Contact Runout Test Arbors
Steep Taper Dual-Contact Runout Test Arbors

Big Plus compatible steep taper spindle runout test bars/ arbors.

Steep Taper (MAS 403 BT) to Steep Taper (DIN 2080) Reducing Adapters
Steep Taper (MAS 403 BT) to Steep Taper (DIN 2080) Reducing Adapters

Converts Steep Taper (MAS 403 BT) to Steep Taper (DIN 2080)

Steep Taper (DIN) to HSK Adapters
Steep Taper (DIN) to HSK Adapters

Adapts from DIN 69871 (standard taper) to DIN 69063 (HSK taper). Maximum runout between steep and HSK taper is 0.003 mm.

HSK Taper Spindle Wipers
HSK Taper Spindle Wipers

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

Page loaded in 20.8976 seconds.