410.210 Series 410 Dial Indicator Tool Taper Gauges

For verification of HSK tool taper per DIN 69893

Series 410 Dial Indicator Tool Taper Gauges (Click image to enlarge)

Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.

PDF Data Sheet: Series 410 Dial Indicator Tool Taper Gauges (410.210)

Products Details Ask a Question Request a Quote

HSK A/C/E	HSK B/D/F	d2	d3	Part Number
HSK-A 25	HSK 32	19	18.15	410.210.125.000
HSK-A 32	HSK 40	24	23.27	410.210.132.000
HSK-A 40	HSK 50	30	29.05	410.210.140.000
HSK-A 50	HSK 63	38	36.90	410.210.150.000
HSK-A 63	HSK 80	48	46.53	410.210.163.000
HSK-A 80	HSK 100	60	58.10	410.210.180.000
HSK-A 100	HSK 125	75	72.60	410.210.190.000
HSK-A 125	HSK 160	95	91.95	410.210.192.000
HSK-A 160	-	120	116.00	410.210.196.000

Complete set in wooden case consisting of taper plug gauge, taper calibrating rings with dial indicator for diameters d2 and d3 (scale 0.001 mm), and certificate.

Function Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.

For more information regarding this item (Series 410 Dial Indicator Tool Taper Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK Dial Indicator Spindle Taper Gauge Manual

Instruction manual for the dial indicator spindle taper gauge (410.310)

Series 968 HSK Tool Holder Taper Gauges

Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges

Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.

Tool Holder Drive Key Tool Taper Gauges

Available for HSK 32, 40, 50, 63, 80, 100, 125, 160

Dial Indicator Spindle Taper Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.

Pneumatic Spindle Taper Gauges

Non-contact measuring with nozzles results in high accuracy and consistency of measuring results. The measuring range can be increased with the built-in dial indicator. This enables the gauge to be used during pre-machining of the taper. Measuring set with case includes nozzle plug gauge with dial indicator and 2 setting rings.

Steep Taper Spindle Taper Dial Indicator Gauge

TAC Rockford's steep taper spindle gauge is designed to verify and measure correct location of the spindle gauge line.

The gauge comes as a complete set with carrying case, dial indicator, and master taper for setting the dial indicator

Pneumatic HSK Tool Holder Taper Gauge Kits

Gauging kit for HSK tool holder taper with pneumatic measuring column. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional capabilities. In addition to providing various ways for measuring input, it can be customized to meet customer requirements.