685.ENS

Mounting Nuts for HSK-A/C Interface Adaption

Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.

PDF Data Sheet: Mounting Nuts for HSK-A/C Interface Adaption (685.ENS)

Ask a Question Request a Quote

For more information regarding this item (Mounting Nuts for HSK-A/C Interface Adaption) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK Taper Adjustable Mounting Fixtures

The Adjustable Mounting Fixture from Transatlantic Connection rotates a full 360 degrees for easy access to all sides of the tool holder. Designed for bench-top mounting.

Workbench Tool Mounting Fixtures

682.126 mounting fixtures have been discontinued. Link below for available alternatives.

Mounting unit partially pre-assembled, aluminum body, holding sleeve, swivel unit and clamping elements. Available for HSK, Capto PSK (PSC), Steep Taper (SK), and VDI.

Steep Taper Basic Mounting Fixtures

The Basic Mounting Fixture is a simple yet effective way to work with your tool holders. The fixture is designed for mounting or simply holding in a vise. Additionally, in conjunction with a surface plate and height gauge, the mounting fixture can be used as an inexpensive alternative to a presetter.

HSK Clamp Style Benchtop Mounting Fixtures

Clamp style unit for horizontal and vertical use. Includes clamping flange and clamping sleeve. Other configurations and clamping fixtures for standard taper tools are also available.

Series 15595.237 Mounting Fixtures

Series 15595.237 tool holder mounting fixtures provide both horizontal and vertical fixturing. Available for PSK/PSC, HSK, and Steep Taper.

A2 Flanged Lathe Spindle Runout Test Bars

Test arbor for mounting to turning-center and measuring run-out. Designed for A2-5, A2-6, etc. lathe face mounting. Also available for flat 110 and 140 lathe face.

- Maximum runout error 0.003mm [0.00012 in.]

Clamp Style Mounting Fixtures with Clamping Lever

Tapers are clamped vertically and horizontally at the collar. All tapers with the same diameter of the collar can be clamped with one fixture. Can be used with interchangeable 4991 series clamping discs/collars for multiple tapers: ISO 40 and 50, HSK-A/C 32, 40, 50, 63, 80, and 100.

Clamp Style Mounting Fixtures

HSK taper is clamped vertically and horizontally at the collar. All tapers with the same diameter of the collar can be clamped with one fixture. For HSK A, C, E, and F tapers 32, 40, 50, and 63.

Drawbar Adapters

Depending on the customer's requirements one or more media can
be transmitted from the end of the spindle (actuation and/or rotary
supply to the front HSK, SSK or Coromant Capto interface.