685.AZS.032.A00

HSK-A/C/E32+B/D/F40 Axial-Clamp Manual Gripper, Version A (Flange Installation)

PDF Data Sheet: HSK Axial-Clamping Manual Grippers for Flange Installation (685.AZS-A)

HSK-A	HSK-B	Key Size	Torque	Force	Part Number
HSK-A/C/E 32	HSK-B/D/F 40	4	3 Nm	9 kN	685.AZS.032.A00
HSK-A/C/E 40	HSK-B/D/F 50	4	6 Nm	20 kN	685.AZS.040.A00
HSK-A/C/E 50	HSK-B/D/F 63	5	10 Nm	30 kN	685.AZS.050.A00
HSK-A/C/E 63	HSK-B/D/F 80	6	12.5 Nm	40 kN	685.AZS.063.A00
HSK-A/C/E 80	HSK-B/D/F 100	8	18 Nm	60 kN	685.AZS.080.A00
HSK-A/C/E 100	HSK-B/D/F 125	8	25 Nm	80 kN	685.AZS.100.A00

For more information regarding this item (HSK-A/C/E32+B/D/F40 Axial-Clamp Manual Gripper, Version A (Flange Installation)) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK Axial-Clamping Manual Grippers for Flange Installation

Steep Taper Tool Changer Alignment Gauge Instruction Manual

The tool changer alignment gauge is designed to verify correct alignment of the machine spindle to the tool changer. See PDF for full instruction manual.

HSK Axial-Clamping Manual Grippers for Direct Installation

Hollow Taper Shank Type D

For use in all areas which require even better support with manual tool changing via a large contact face. Hollow Taper Shanks for Manual Tool Changing acc. to ISO 12164/DIN 69 893 Part 1 and 2 without Gripper Groove.

Mounting Nuts for HSK-A/C Interface Adaption

Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.

HSK Axial-Clamping Manual Clamping Grippers

The Axial pliers Spanner is a manual HSK-tensioners with axially in the center lying indirect drive, which is accessible both from the front and from behind. It is particularly suitable for clamping of HSK, especially grinding wheel shots, with the AZS can be integrated into the hub of a wheel on the one hand, (HSK arranged vice versa
- the spindle is the father) on the other hand, as usual, can be incorporated into the spindle using flange.