410.210.132.000
HSK-A 32 Series 410 Dial Indicator Tool Taper Gauges
For verification of HSK tool taper per DIN 69893
Full Data Sheet (410.210)
PDF Data Sheet: Series 410 Dial Indicator Tool Taper Gauges (410.210)| Product | Gauge |
| Part Type | Spindle Taper |
| Taper / Standard | HSK-A |
| Taper Size | 32 |
| d2 | 24 |
| HSK B/D/F | HSK 40 |
| d3 | 23.27 |
| HSK A/C/E | HSK B/D/F | d2 | d3 | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| HSK-A 25 | HSK 32 | 19 | 18.15 | 410.210.125.000 | ||||
| HSK-A 32 | HSK 40 | 24 | 23.27 | 410.210.132.000 | ||||
| HSK-A 40 | HSK 50 | 30 | 29.05 | 410.210.140.000 | ||||
| HSK-A 50 | HSK 63 | 38 | 36.90 | 410.210.150.000 | ||||
| HSK-A 63 | HSK 80 | 48 | 46.53 | 410.210.163.000 | ||||
| HSK-A 80 | HSK 100 | 60 | 58.10 | 410.210.180.000 | ||||
| HSK-A 100 | HSK 125 | 75 | 72.60 | 410.210.190.000 | ||||
| HSK-A 125 | HSK 160 | 95 | 91.95 | 410.210.192.000 | ||||
| HSK-A 160 | - | 120 | 116.00 | 410.210.196.000 |
For more information regarding this item (HSK-A 32 Series 410 Dial Indicator Tool Taper Gauges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Series 410 Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.
HSK Dial Indicator Spindle Taper Gauge Manual
Instruction manual for the dial indicator spindle taper gauge (410.310)
Series 968 HSK Tool Holder Taper Gauges
Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.
Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
Dial Indicator Spindle Taper Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.
Pneumatic Spindle Taper Gauges
Non-contact measuring with nozzles results in high accuracy and consistency of measuring results. The measuring range can be increased with the built-in dial indicator. This enables the gauge to be used during pre-machining of the taper. Measuring set with case includes nozzle plug gauge with dial indicator and 2 setting rings.
Steep Taper Spindle Taper Dial Indicator Gauge
TAC Rockford's steep taper spindle gauge is designed to verify and measure correct location of the spindle gauge line.
The gauge comes as a complete set with carrying case, dial indicator, and master taper for setting the dial indicator
Pneumatic HSK Tool Holder Taper Gauge Kits
Gauging kit for HSK tool holder taper with pneumatic measuring column. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional capabilities. In addition to providing various ways for measuring input, it can be customized to meet customer requirements.
HSK Certified Master Taper Gauge
These taper master gauges can be used for zeroing the dial indicators on our HSK Tool Holder Inspection Gauges.
Submit your feedback