440.C00
PSC (PSK) Tool Changer Alignment Gauges
Polygonal-Shank Taper (PSK) Tool Changer Alignment
Available for Polygonal-Shank Taper sizes C3, C4, C5, C6, C8, C8X, C10. Includes padded storage case.
PDF Data Sheet: PSC (PSK) Tool Changer Alignment Gauges (440.C00)
Tool changer alignment gauges verify proper alignment between the tool changer spindle. Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder. In addition, mis-clamping and dropped tools can also occur.
Capto taper sets include taper and flange, axial and radial alignment pins, and a padded carrying case.
Capto Tool Changer Alignment Instruction Manual
The tool changer alignment tool is to verify proper alignment between the automatic tool changer (ATC) and the spindle or clamping unit. See PDF for full instruction manual.
For more information regarding this item (PSC (PSK) Tool Changer Alignment Gauges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Capto Tool Changer Alignment Instruction Manual
The tool changer alignment tool is to verify proper alignment between the automatic tool changer (ATC) and the spindle or clamping unit. See PDF for full instruction manual.
PSC / PSK Spindle Runout Test Arbors
Made to the ISO 26623 Standard. Maximum runout error 0.003mm / 3 micron / 0.00012”. A certificate of accuracy is included. Storage are cases not included.
ForceCheck Force Gauge Base Set - Wired
Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
ForceCheck Drawbar Force Gauge Base Set, Wireless
Sets include wireless display and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
Machine-Integrated Drawbar Force Gauges
The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.
Submit your feedback