80.960.00.IN

Zero Master Analog Setup Indicator - Analog Probe w/ Short Probe Tip, Inch

The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is adapted to small machines. The clamping shank has a diameter of 10 mm. Thus it can be also used on machines with ISO 30 or with small HSK spindles. The housing is shortened and does not protrude far out of the spindle so that even big work pieces can be measured. The Zero Master can be read with a small analog dial gauge.

Full Data Sheet (570.111)

PDF Data Sheet: Zero Master Analog Setup Indicator (570.111)

Details Ask a Question Request a Quote

Product	Accessory
Part Type	Machine Setup Indicator
Probe Dia.	0.2"
Accuracy	0.0004"
Probe Length	1"

Item	Probe Dia.	Accuracy	Probe Length	Part Number
Short Probe Tip	4 mm	0.01 mm	-	80.362.00
Long Probe Tip	8 mm	0.01 mm	-	80.363.00
Long 3-D Probe Tip	0.4"		2.6"	80.365.30
Analog Probe w/ Short Probe Tip, Metric	4 mm	0.01 mm	25 mm	80.960.00
Analog Probe w/ Short Probe Tip, Inch	0.2"	0.0004"	1"	80.960.00.IN

For more information regarding this item (Zero Master Analog Setup Indicator - Analog Probe w/ Short Probe Tip, Inch) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Zero Master Analog Setup Indicator

Centro Setup Indicator

With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The machine spindle is then positioned near the bore or shaft that is to be measured, and rotates at low speed.

3D Universal Setup Indicator

Short and long probes are available. The sensor probes may be changed without any tool. No re-calibration of the unit is needed during a sensor probe change over. Simply bring the needle to Zero, and that is your edge with any probe. The accuracy is such that you are able to inspect your parts right on the machine.

Zero Master Digital Setup Indicator

The dial gauge indicates the distance between spindle axis and workpiece edge. As soon as the gauge shows zero, the spindle axis is exactly on the workpiece edge on the first attempt. This eliminates calculating or problems with positive or negative signs.

3D New Generation Setup Indicator

The 3D-Sensor NG is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design.

HSK Dial Indicator Spindle Taper Gauge Manual

Instruction manual for the dial indicator spindle taper gauge (410.310)

Vibration Meter

Measures velocity and acceleration. The large display indicates RMS, peak, min/max, hold, and low battery. Features an auto power off. Comes ready to use in a foam-lined, hardshell carrying case, with a detachable magnetic probe, 9V battery and instructions.