Tool Taper Cleaning Machines

Keep precision at the spindle interface by keeping tool holders clean: The required cleaning unit is simply placed on the drive unit and the taper cleaning device is immediately ready for use.

Cylindrical Cleaning Mandrels

For cleaning the bore of the tool holder. e.g. hydraulic chucks and shrink fit chucks.

HSK Tool Holder Taper Wipers

Used for cleaning the external taper and face.

HSK External Taper Cleaning Wipers

For cleaning the external taper and face.

Cooling Filtration Systems

Cooling Filtration Systems are designed for automatic purification cleaning and temperature equilibration of cooling lubricants. They are used in honing, grinding and glass grinding machines and in tempering and washing plants etc.

Hollow Taper Shank Type A

For use with machining centers, milling machines, special-purpose machines with automatic tool changing. Hollow Taper Shanks for Automatic Tool Changing acc. to ISO 12164/DIN 69 893 Part 1 and 2 with Gripper Groove.

Steep Taper Spindle Wipers

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

Custom Tool Holders

HSK Spindle Wipers

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

Hydrocyclones

Hydrocyclone Cooling Lubricant
-- cleaning systems operate in all applications where heavy dirt particles are to be separated from low viscous liquids
-- e.g. on machine tools (especially grinding machines), but also on machining stations, transfer lines and parts washing plants.