Morse Spindle Taper Plug Gauges

TAC Rockford Morse spindle taper gauges are for inspection of Morse spindle tapers. Gauges made from a hardened gauge steel, and include a certificate. Manufactured per DIN 229.

Overview: Morse Taper Gauges

Tool Holder Taper Inspection Gauge

Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)

The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.

Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.

The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.

ForceCheck Hydraulic Tool Holder Force Gauges

Hydraulic tool holders are an excellent ultra-low option with added benefits such as vibration damping and ease of use. One of the major challenges with hydraulic holders is determining if they are still functioning correctly over time. Failure of the hydaulic holding mechanism is often not apparent until cutter slippage occurs, potentially causing damage to both the holder and a scrapped workpiece.

ForceCheck hydraulic tool holder force gauges provide a quick and reliable way to verify a tool holder is still operating correctly. The sensor measures the force at the center of the hydraulic sleeve.

Using the gauge is as easy as inserting the sensor in the hydraulic holder. Once the actuation piston compresses the hydraulic fluid in the expansion sleeve, the resulting force is shown on a handheld digital display. The measured force can be compared to a new or known-good hydraulic tool holder.

Tool Holder Taper Sleeve Gauges

Available for Steep Taper CAT/ANSI/DIN/BT/ISO 10, 15, 20, 25, 30, 35 40, 45, 50, 55, 60, 65

Morse Taper Spindle Runout Arbors

Morse taper runout arbors offer a quick and easy way to verify correct spindle runout for machines with Morse tapers. Included is a threaded spanner nut to facilitate removable from the Morse spindle.

Arbors are manufactured to standard DIN 229 with a metric thread. Contact us for different sizes or customized versions.

HSK-A Morse Taper Holders

Available for HSK-A 50, 63, 80, 100

Series 410 Dial Indicator Tool Taper Gauges

Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.

Tool Holder Taper Check Gauges

<b>This product has been replaced by gauge 430.124.</b> <a href="http://tacrockford.com/product/gauges/tool-holder-taper/steep-taper/tool-holder-taper-inspection-gauges/">Click here to link to this product.</a>

<b>Features</b>

-Maximize tool life and spindle life

-Ensure tool holder performance

-Tool holder can be tested with components assembled, and works with retention knob installed

-Includes (A) and (B) indicators with 0.0001" resolution

-Carbide locating pins for long life

-Made with hardened tool steel body

-Comes with master shank (C)