530.110.190.000 HSK-A/C/E 100 Tool Holder Taper Wipers

HSK-A/C/E 100 Tool Holder Taper Wipers

Used for cleaning the external taper and face.

PDF Data Sheet: HSK Tool Holder Taper Wipers (530.110)

Product	Accessory
Part Type	Tool Holder Taper Wiper
Taper / Standard	HSK-A/C/E
Taper Size	100
Ø (d1)	125
Length (l1)	77

Taper	Length (l1)	Ã˜ (d1)	Part Number
HSK-A/C/E 40	36	53	530.110.140.000
HSK-A/C/E 50	42	66	530.110.150.000
HSK-A/C/E 63	53	83	530.110.163.000
HSK-A/C/E 80	58	103	530.110.180.000
HSK-A/C/E 100	77	125	530.110.190.000

For more information regarding this item (HSK-A/C/E 100 Tool Holder Taper Wipers) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK Tool Holder Taper Inspection Gauge

Designed to detect tool holder taper wear in seconds.

The tool holder taper inspection gauge includes two Fixture Bases, two 0.001mm Indicators, and a carrying case. An optional 410.148 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a known good tool holder can be used in place of the master. Click the Details Tab for more information.

HSK Tool Holder Taper Wipers

Used for cleaning the external taper and face.

Steep Taper Tool Holder Taper Wipers

Tool Holder Taper Inspection Gauge

Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)

The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.

Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.

The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.

Tool Holder Drive Key Tool Taper Gauges

Available for HSK 32, 40, 50, 63, 80, 100, 125, 160

Axial Collet Clamping Grippers for HSK 100 Grinding Wheels

The AZS gripper is specially designed to manually mount heavy grinding wheels to a standard HSK 100 tool interface. The grinding wheel is mounted onto a HSK-style tool holder and is held to the spindle extremely accurately. The gripper allows very high clamping forces in a compact design. For example, the clamping force is 55 kN with a clamping torque of only 30 Nm for HSK 100. If needed, this AXS-100 gripper could be adapted for any HSK standard.