320.003
Gutekunst Bent Wire Parts
We use the following materials in any variant in manufacturing wire bent parts for our clients: 1.4310, 1.4301, 1.1200, plus any special material you may request or supply. We offer the following range of dimensions: wire thickness values of 0.2 to 4.0 mm.
PDF Data Sheet: Gutekunst Bent Wire Parts (320.003)We use the following materials in any variant in manufacturing wire bent parts for our clients: 1.4310, 1.4301, 1.1200, plus any special material you may request or supply.
We offer the following range of dimensions: wire thickness values of 0.2 to 4.0 mm.
As for the finishing we offer: vibratory grinding, hardening, bronzing, galvanizing, chroming, tin-coating, lacquering and coating.
For more information regarding this item (Gutekunst Bent Wire Parts) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Square Springs
We are your specialists in the manufacturing of square springs for industrial use. Our standard springs are made of 1.4310 material with a wire thickness of 1.0 mm. Other materials and thickness values are available at request.
Multi-Wire Springs
Multi-wire springs are made of wire strands with various strand structures and are put to use as compression, torsion, tension and form springs.
Compression Springs Overview
Steel springs from Gutekunst are manufactured using spring steel wire material no.1.4310 in compliance with EN 10270 part 3 (AISI 302 / BS 301S21). The tolerances of the wire diameters comply with DIN 2076.
Flat Wire Compression Springs
Compression springs made from flat wire
- wound to the spring axis
- offer the advantage of higher energy absorption at the same installation space compared to round wire compression springs. Furthermore, flat wire compression springs are more resistant to buckling and will encounter no friction martensite at high frequencies
-- unlike round wire compression springs, where the life expectancy is reduced. Our in-house rolling mills allow us to roll and process high-quality spring steels to the specific wire profiles our customers need. By choosing the right wire profile and spring dimensions, both linear and progressive characteristics can be realized.
Wire-Rope Clips with Spring-Operating Storage
Wire-rope clips for cable lifts and chair lifts for wire-rope diameters from 13-32 mm. Our wire-rope clips with spring-operating storage and pendular-break meet the highest demands concerning quality in the ski-lift industry. The clips are manufactured from highly forged heat-treated steel and therefore show the highest qualities concerning lifetime and wear. Because of design and state-of-the-art engineering this component features the highest ride comfort and operational safety.
Round Wire Compression Springs
Round wire compression springs are used in countless applications and fulfill / meet the widest range of technical requirements. We calculate the ideal spring design and select the appropriate spring material according to the load and environmental conditions. We can guarantee our customers the highest quality of our products.
TULMOBIL Tool Carriers Model H3-2
To accommodate 32 tool carriers horizontally. With 2 swivel castors (one with locking device), 2 fixed castors, 2 safety hand grips (bent), 2 safety hand grips (upright).
TULMOBIL Tool Carriers Model H1
To accommodate 8 tool carriers horizontally. With 2 swivel castors (one with locking device), 2 fixed castors, 2 safety hand grips (bent), 2 safety hand grips (upright), 1 deposit board.
TULMOBIL Tool Carriers Model H2
To accommodate 12 tool carriers horizontally. With 2 swivel castors (one with locking device), 2 fixed castors, 2 safety hand grips (bent), 2 safety hand grips (upright), 1 deposit board.
Submit your feedback