461.310.000.000
ForceCheck Base Set
Full Data Sheet (461.310)
PDF Data Sheet: ForceCheck Force Gauge Base Set - Wired (461.310)| Product | ForceCheck |
| Part Type | Base Set |
| Part Number | ||||||||
|---|---|---|---|---|---|---|---|---|
| ForceCheck Base Set | 461.310.000.000 |
HSK Drawbar Force Gauge Sensors, Wired
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
Steep Taper (CAT/ANSI) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
Steep Taper (BT) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
| ForceCheck Sensor, Wired | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| Steep Taper (BT) 30 | 461.200.730.000 | |||||||
| Steep Taper (BT) 35 | 461.200.735.000 | |||||||
| Steep Taper (BT) 40 | 461.200.740.000 | |||||||
| Steep Taper (BT) 50 | 461.200.750.000 | |||||||
| ForceCheck Base Set | 461.310.000.000 |
Steep Taper (DIN) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
PSK/PSC Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
| ForceCheck Sensor, Wired | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| PSK/PSC C3 | 461.200.C03.000 | |||||||
| PSK/PSC C4 | 461.200.C04.000 | |||||||
| PSK/PSC C5 | 461.200.C05.000 | |||||||
| PSK/PSC C6 | 461.200.C06.000 | |||||||
| PSK/PSC C8 | 461.200.C08.000 | |||||||
| PSK/PSC C10 | 461.200.C10.000 | |||||||
| PSK/PSC C8X | 461.200.C8X.000 |
KM Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
| ForceCheck Sensor, Wired | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| KM 32 | 461.200.K32.000 | |||||||
| KM 40 | 461.200.K40.000 | |||||||
| KM 50 | 461.200.K50.000 | |||||||
| KM 63 | 461.200.K63.000 | |||||||
| KM 6350 | 461.200.K65.000 | |||||||
| KM 80 | 461.200.K80.000 | |||||||
| KM 100 | 461.200.K90.000 | |||||||
| KM 10080 | 461.200.K98.000 | |||||||
| KM4X 63 | 461.200.K63.04B | |||||||
| KM4X 100 | 461.200.K90.04B |
Steep Taper (ISO) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
| ForceCheck Sensor, Wired | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| Steep Taper (ISO) 10 | 461.200.A10.000 | |||||||
| Steep Taper (ISO) 15 | 461.200.A15.000 | |||||||
| Steep Taper (ISO) 20 | 461.200.A20.000 | |||||||
| Steep Taper (ISO) 25 | 461.200.A25.000 |
ForceCheck Sensor for Lyndex-Nikken NC5
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
| ForceCheck Sensor, Wired | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| Lyndex-Nikken NC5-46 | 461.200.L46.000 | |||||||
| Lyndex-Nikken NC5-53 | 461.200.L53.000 | |||||||
| Lyndex-Nikken NC5-63 | 461.200.L63.000 | |||||||
| Lyndex-Nikken NC5-85 | 461.200.L85.000 | |||||||
| Lyndex-Nikken NC5-100 | 461.200.L90.000 |
Chuck Force Gauges - Wired
Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.
| Measuring Diameter | Jaws | Diameter | Force Range (per Jaw) | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| D28 | 2 / 3 | 28 mm / 1.10 in. | 0...15kN / 3,400 lb-F | 495.200.028.003 | ||||
| D72 | 2 / 3 | 72 mm / 2.83 in. | 0...50kN / 11,200 lb-F | 495.200.072.003 | ||||
| D125 | 2 / 3 / 4 | 125 mm / 4.92 in. | 0...65kN / 14,600 lb-F | 495.200.125.004 | ||||
| D200 | 2 / 3 / 4 / 6 | 200 mm / 7.87 in. | 0...100kN / 22,500 lb-F | 495.200.200.006 | ||||
| D28 (Low Force) | 2 / 3 | 28 mm / 1.10 in. | Contact us | 495.200.028.003.LF | ||||
| D72 (Low Force) | 2 / 3 | 72 mm / 2.83 in. | Contact us | 495.200.072.003.LF | ||||
| D125 (Low Force) | 2 / 3 / 4 | 125 mm / 4.92 in. | Contact us | 495.200.125.004.LF | ||||
| D200 (Low Force) | 2 / 3 / 4 / 6 | 200 mm / 7.87 in. | Contact us | 495.200.200.006.LF |
ForceCheck Workholding Collet Force Gauge
ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.
Applications for ForceCheck workholding collet force gauges include:
-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining
A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.
For more information regarding this item (ForceCheck Base Set) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Drawbar Force Base Unit and Accessories
Various accessories, base sets, and custom items for the ForceCheck system.
Large Diameter VTL Chuck Force Gauges
Measure clamping force on 12+ inch diameter chucks. Available as wired or wireless sensor unit. Base set is separate which includes wired or wireless read-out display, custom case, and accessories for the sensor.
ForceCheck Drawbar Force Gauge Base Set, Wireless
Sets include wireless display and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
ForceCheck Workholding Collet Force Gauge
ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.
Applications for ForceCheck workholding collet force gauges include:
-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining
A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.
ForceCheck Force Gauge Base Set - Wired
Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
ForceCheck Hydraulic Tool Holder Force Gauges
Hydraulic tool holders are an excellent ultra-low option with added benefits such as vibration damping and ease of use. One of the major challenges with hydraulic holders is determining if they are still functioning correctly over time. Failure of the hydaulic holding mechanism is often not apparent until cutter slippage occurs, potentially causing damage to both the holder and a scrapped workpiece.
ForceCheck hydraulic tool holder force gauges provide a quick and reliable way to verify a tool holder is still operating correctly. The sensor measures the force at the center of the hydraulic sleeve.
Using the gauge is as easy as inserting the sensor in the hydraulic holder. Once the actuation piston compresses the hydraulic fluid in the expansion sleeve, the resulting force is shown on a handheld digital display. The measured force can be compared to a new or known-good hydraulic tool holder.
Kennametal (KM Taper) Drawbar Force Gauges
Measuring bars, complete sets, and base units for measuring drawbar force on a Kennametal KM spindle.
HSK Taper Drawbar Force Gauges
Measuring bars, complete sets, and base sets for all HSK type spindles. Contact us for other wireless and carrying case options.
Steep Taper (MAS 403 BT) Drawbar Force Gauges
Measuring bars, complete sets, and base sets for Steep Taper (MAS 403-BT) JIS standard.
Steep Taper (DIN) Drawbar Force Gauges
Measuring bars, complete sets, and base sets for Steep Taper (SK) DIN standard. Metric or inch retention knob / pull-stud threading available on each measuring bar.
Submit your feedback