293-PSP-VK
BERG Automatic Electromechanical Wedgebar Style Clamping Systems
Self-traveling (Automatic) quick die clamping system with wedgebar / wedge jaw style clamping
Electromechanical clamp for die clamping on press slides. The clamp automatically travels between the parking position and the actual die, guided by the T-slot of the slide. In parking position, the clamp is safely locked by the wedge jaw.
PDF Data Sheet: BERG Automatic Electromechanical Wedgebar Style Clamping Systems (293-PSP-VK)
For more information regarding this item (BERG Automatic Electromechanical Wedgebar Style Clamping Systems) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Stationary Electromechanical Moving Bolster Clamp Wedgebar Style Clamping Systems
Electromechanical wedgebar style clamp for clamping moving bolsters. When unclamping, the clamping wedge withdraws into the clamp body.
Stationary Electromechanical Rotational Style Clamping Systems
Electromechanical rotational-style clamp for die clamping on slides and blank-holders. When unclamping, the draw bar rotates 90 degrees.
Stationary Hydraulic Wedgebar Style Clamping Systems
The hydromechanical wedge bar style clamping system is designed for clamping moving bolsters. The clamping slide generating the clamping force moves back into the housing after release.
Stationary Electromechanical Swing-out Style Clamping Systems
Electromechanical swing-out style clamp for die clamping on slides and blank-holders. When unclamping the draw-bar swings out up to 15 degrees maximum.
Stationary Electromechanical Gripper Style Clamping Systems
Electromechanical gripper style clamp for die clamping on sides. When unclamping the collet opens in order to disengage the draw bolt of the die.
Stationary Clamping Systems
The hydraulic die clamping system, PSP...HB, is designed to automatically clamp tools at the press slide or on the table. In the "Unclamped" position, the tensioning rod is completely retracted into the clamping element and initially moved out of the clamping element when pressure is applied.
Automatic Electromechanical Bellcrank Lever Style Clamping Systems
Electromechanical clamp for die clamping on press slides. The clamp automatically travels between the parking position and the actual die, guided by the T-slot of the slide. The bell-crank lever covers a wider clamping range.
Automatic Electromechanical Drawbar Style Clamping Systems
The electro-mechanical self-locking drawbar style clamping system is designed for quick clamping dies of different widths with clamping slot on press slides.
The clamping systems are controlled de-centrally and individually in each clamping system. Each local clamp control system communicates with the pressing machine control system. The clamping actuator automatically moves into the T-slot of the press slide between the parking position and the respective die. The electro-mechanical clamping system clamps the die and switches off automatically on reaching the clamping force.
Stationary Electromechanical Pull-back Rotational Style Clamping Systems
Electromechanical pull-back rotational clamp for die clamping on slides and for clamping of moving bolsters. When unclamping the draw bar rotates 90 degrees and withdraws by 120 mm max.
Submit your feedback