410.231.132.000 HSK-A/C/E 32 Series 978 HSK 30 Degree Clamping Angle Gauges

HSK-A/C/E 32 Series 978 HSK 30 Degree Clamping Angle Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface.

Full Data Sheet (410.231)

PDF Data Sheet: Series 978 HSK 30 Degree Clamping Angle Gauges (410.231)

Details Ask a Question Request a Quote

Product	Gauge
Part Type	Tool Holder Taper
Taper / Standard	HSK-A/C/E
Taper Size	32
d1	19
l1	8.92

Taper	l1	d1	Part Number
HSK-A/C/E 25	7.21	15	410.231.125.000
HSK-A/C/E 32	8.92	19	410.231.132.000
HSK-A/C/E 40	11.42	23	410.231.140.000
HSK 50	14.13	29	410.231.150.000
HSK-A/C/E 63	18.13	37	410.231.163.000
HSK-A/C/E 80	22.85	46	410.231.180.000
HSK-A/C/E 100	28.56	58	410.231.190.000

For more information regarding this item (HSK-A/C/E 32 Series 978 HSK 30 Degree Clamping Angle Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Series 978 HSK 30 Degree Clamping Angle Gauges

Series 968 HSK Tool Holder Taper Gauges

Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges

Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.

Tool Racks Model M8S

To accommodate 8 tool carriers in two rows (4 tool carriers per row), arranged at a 35 degree angle.

Lathe Spindle Face Ring

Series 492.026 ring gauges are for lathe spindle face.

Tool Racks Model 8

To accommodate 8 tool carriers in two rows (4 tool carriers per row), arranged at a 35 degree angle. Used as a table model or as a standing model with an underframe.

HSK Drawbar Sensor Position Gauges

Drawbar position gauges are used to adjust and set drawbar stroke position on HSK machine tool spindles. The gauges allow the clamping angle to be adjusted to the high and low limits, allowing the stroke position to be set.

Series 410 Dial Indicator Tool Taper Gauges

Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.

HSK Coolant Tubes

Available for HSK-A 32, 40, 50, 63, 80, 100, 125, 160

Drive Key Spindle Gauges

When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case: "go" and "no go" plug gauges.

410.231.132.000