530.310

Tool Taper Cleaning Machines

Keep precision at the spindle interface by keeping tool holders clean: The required cleaning unit is simply placed on the drive unit and the taper cleaning device is immediately ready for use.

Tool Taper Cleaning Machines (Click image to enlarge)
Tool Taper Cleaning Machines (Click image to enlarge)

PDF Data Sheet: Tool Taper Cleaning Machines (530.310)

Print Data Sheet

Keep precision at the spindle interface by keeping tool holders clean: The required cleaning unit is simply placed on the drive unit and the taper cleaning device is immediately ready for use.

• Reduce waste
• Increase the tool life
• Protect the machine spindle
• Maintain lasting precision


Unit for Taper Part Number
QuickClean Drive Unit                 530.310.000.100
HSK-A/C/E 50                 530.310.150
HSK-A/C/E 63                 530.310.163
HSK-A/C/E 80                 530.310.180
HSK-A/C/E 100                 530.310.190
Steep Taper 40                 530.310.840
Steep Taper 50                 530.310.850

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Tool Taper Cleaning Machines) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK Tool Holder Taper Wipers
HSK Tool Holder Taper Wipers

Used for cleaning the external taper and face.

Cylindrical Cleaning Mandrels
Cylindrical Cleaning Mandrels

For cleaning the bore of the tool holder. E.g. hydraulic chucks and shrink fit chucks.

HSK External Taper Cleaning Wipers
HSK External Taper Cleaning Wipers

For cleaning the external taper and face.

Hollow Taper Shank Type A
Hollow Taper Shank Type A

For use with machining centers, milling machines, special-purpose machines with automatic tool changing. Hollow Taper Shanks for Automatic Tool Changing acc. to ISO 12164/DIN 69 893 Part 1 and 2 with Gripper Groove.

Cooling Filtration Systems
Cooling Filtration Systems

Cooling Filtration Systems are designed for automatic purification cleaning and temperature equilibration of cooling lubricants. They are used in honing, grinding and glass grinding machines and in tempering and washing plants etc.

Steep Taper Spindle Wipers
Steep Taper Spindle Wipers

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

HSK Taper Spindle Wipers
HSK Taper Spindle Wipers

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

Hollow Taper Shank Type C
Hollow Taper Shank Type C

Preferably for use with spindles in transfer lines and special-purpose machines without automatic tool changing, stub spindles, extensions or reducers. Hollow Taper Shanks for Manual Tool Changing acc. to ISO 12164/DIN 69 893 Part 1 and 2 without Gripper Groove.

Page loaded in 6.7809 seconds.