455.110.750.000
Steep Taper Master Setting Gauges - Steep Taper 50 (BT)
Full Data Sheet (455.800)
PDF Data Sheet: Steep Taper Master Setting Gauges (455.800)| Product | Gauge |
| Part Type | Center Height |
| Taper / Standard | Steep Taper (BT) |
| Taper Size | 50 |
| D (mm) | 102 |
| L (mm) | 65 |
| f1 (mm) | 55 |
| Taper | L (mm) | D (mm) | f1 (mm) | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| Steep Taper 30 (BT) | 60 | 46 | 35 | 455.110.730.000 | ||||
| Steep Taper 40 (BT) | 65 | 65 | 45 | 455.110.740.000 | ||||
| Steep Taper 50 (BT) | 65 | 102 | 55 | 455.110.750.000 | ||||
| Steep Taper 30 (DIN) | 60 | 50 | 35 | 455.110.830.000 | ||||
| Steep Taper 40 (DIN) | 65 | 65 | 45 | 455.110.840.000 | ||||
| Steep Taper 45 (DIN) | 65 | 82.5 | 50 | 455.110.845.000 | ||||
| Steep Taper 50 (DIN) | 65 | 102 | 55 | 455.110.850.000 | ||||
| Steep Taper 40 (CAT/ANSI) | 65 | 65 | 45 | 455.110.940.000 | ||||
| Steep Taper 50 (CAT/ANSI) | 65 | 102 | 55 | 455.110.950.000 |
For more information regarding this item (Steep Taper Master Setting Gauges - Steep Taper 50 (BT)) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Steep Taper Spindle Plug Gauges
TAC Rockford gauges are used for inspection of steep taper spindle tapers per CAT, ISO, JIS, DIN, etc. Available for Steep Taper 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65
Tool Holder Taper Check Gauges
<b>This product has been replaced by gauge 430.124.</b> <a href="http://tacrockford.com/product/gauges/tool-holder-taper/steep-taper/tool-holder-taper-inspection-gauges/">Click here to link to this product.</a>
<b>Features</b>
-Maximize tool life and spindle life
-Ensure tool holder performance
-Tool holder can be tested with components assembled, and works with retention knob installed
-Includes (A) and (B) indicators with 0.0001" resolution
-Carbide locating pins for long life
-Made with hardened tool steel body
-Comes with master shank (C)
Steep Taper Tool Changer Alignment Gauges
Available for Steep Taper 30, 40, 50, and 60. Includes padded storage case.
Steep Taper Spindle Taper Dial Indicator Gauge
TAC Rockford's steep taper spindle gauge is designed to verify and measure correct location of the spindle gauge line.
The gauge comes as a complete set with carrying case, dial indicator, and master taper for setting the dial indicator
Steep Taper (MAS 403 BT) to Steep Taper (DIN 2080) Reducing Adapters
Converts Steep Taper (MAS 403 BT) to Steep Taper (DIN 2080)
Tool Holder Taper Inspection Gauge
Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)
The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.
Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.
The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.
HSK Certified Master Taper Gauge
These taper master gauges can be used for zeroing the dial indicators on our HSK Tool Holder Inspection Gauges.
Submit your feedback