683.512.060.100
Guhring HSK-C to Steep Taper (ISO) Basic Adapters - Steep Taper (ISO) 60
For converting DIN 69871 form AD/HSK-C to Steep Taper (ISO)
Full Data Sheet (683.512)
PDF Data Sheet: HSK-C to Steep Taper (ISO) Basic Adapters (683.512)| Product | Tool Holder |
| Part Type | Taper Adapter |
| Taper / Standard | Steep Taper (ISO) |
| Taper Size | 60 |
| HSK-C Taper (d1) | HSK-C 100 |
| Length (l1) | 50 |
| d2 | 155.0 |
| SW | 8.0 |
| Steep Taper (SK) | HSK-C Taper (d1) | Length (l1) | d2 | SW | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| Steep Taper (ISO) 40 | HSK-C 32 | 40 | 63.5 | 2.5 | 683.512.040.032 | |||
| Steep Taper (ISO) 40 | HSK-C 40 | 40 | 63.5 | 3.0 | 683.512.040.040 | |||
| Steep Taper (ISO) 40 | HSK-C 50 | 40 | 63.5 | 4.0 | 683.512.040.050 | |||
| Steep Taper (ISO) 40 | HSK-C 63 | 70 | 63.5 | 5.0 | 683.512.040.063 | |||
| Steep Taper (ISO) 50 | HSK-C 32 | 40 | 97.5 | 2.5 | 683.512.050.032 | |||
| Steep Taper (ISO) 50 | HSK-C 40 | 40 | 97.5 | 3.0 | 683.512.050.040 | |||
| Steep Taper (ISO) 50 | HSK-C 50 | 40 | 97.5 | 4.0 | 683.512.050.050 | |||
| Steep Taper (ISO) 50 | HSK-C 63 | 40 | 97.5 | 5.0 | 683.512.050.063 | |||
| Steep Taper (ISO) 50 | HSK-C 80 | 70 | 97.5 | 6.0 | 683.512.050.080 | |||
| Steep Taper (ISO) 50 | HSK-C 100 | 100 | 97.5 | 8.0 | 683.512.050.100 | |||
| Steep Taper (ISO) 60 | HSK-C 100 | 50 | 155.0 | 8.0 | 683.512.060.100 |
For more information regarding this item (Guhring HSK-C to Steep Taper (ISO) Basic Adapters - Steep Taper (ISO) 60) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-C to Steep Taper (ISO) Basic Adapters
- Form B available on request
- Part 683.512.050.100 only applies to presetting unit
- Includes clamping set
- Includes brass locking ring
Steep Taper (DIN) to Steep Taper (ISO) Reducing Adapters
For tools with Steep Taper DIN 2080, DIN 69871, or MAS 403 BT.
ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079
- Includes clamping set for conventional cooling
- Includes retention screws
Steep Taper (MAS 403 BT) to Steep Taper (ISO) Reducing Adapters
For tools with Steep Taper DIN 2080, DIN 69871 or MAS 403 BT.
Steep Taper to PSK (PSC) Adapters
For holding PSK tools ISO 26623-1, d1 = nominal size PSK.
Steep Taper (DIN) to HSK Adapters
Adapts from DIN 69871 (standard taper) to DIN 69063 (HSK taper). Maximum runout between steep and HSK taper is 0.003 mm.
Steep Taper (ISO) Drawbar Force Gauges
Measuring bars, complete sets, and base units for measuring drawbar force on a Steep Taper (SK) ISO standard spindle.
Submit your feedback