291-OSKL

BERG OSKL Tool Clamping Cylinders

BERG OSKL Tool Clamping Cylinders (Click image to enlarge)
BERG OSKL Tool Clamping Cylinders (Click image to enlarge)

OSKL rotating hydraulic cylinders are primarily designed for actuating SSK gripper, but are also suitable for operating other clamping and chucking systems.

PDF Data Sheet: BERG OSKL Tool Clamping Cylinders (291-OSKL)

ApplicationOSKL rotating hydraulic cylinders are primarily designed for actuating SSK gripper, but are also suitable for operating other clamping and chucking systems.

Design FeaturesOSKL hydraulic cylinders comprise the rotating cylinder body and a hydraulic rotary transmission leadthrough which moves axially with the piston. Clamping and release are
per formed hydraulically. In the event of a hydraulic supply failure, a pilot controlled check valve maintains the pressure in the clamping direction and thus the clamping force. The residual clamping pressure in the cylinder can be checked by way of the test connection provided. If the hydraulic supply remains switched off for a prolonged period while the tools are in the spindle, ensure that the weights of the tool and the draw bar are held by a spring element.

In comparison to clamping systems operating with plate
springs, the clamping forces of OSKL hydraulic cylinders are infinitely variable throughout the wide pressure range. No axial forces act upon the spindle bearings during release and ejection of the tools as the rotating cylinder body
is permanently fixed to the spindle.

The central hole permits the supply of compressed air or coolant lubricant; a threaded connection is provided for the Deublin rotary lead-in 1106, which does not, however, allow dry running.

The external edges of the hydraulic rotary transmission leadthrough, in conjunction with inductive proximity switches to be installed on the machine side, are suitable for monitoring the clamping and release position.

Install horizontally or vertically with the hydraulic transmission leadthrough pointing upwards.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BERG OSKL Tool Clamping Cylinders) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HDT Tool Clamping Cylinders
HDT Tool Clamping Cylinders

HDT pressure intensifiers are primarily designed for tool clamping and chucking systems using stationary hydraulic cylinders of the type HLZ for releasing the tool shanks when no hydraulic unit is available for operating them.

HLZ Tool Clamping Cylinders
HLZ Tool Clamping Cylinders

HLZ hydraulic cylinders, in conjunction with spring actuated tool clamping and chucking devices, are intended for release and ejection of steep taper tooling and for stationary mounting.

Workpiece Holding Clamping Systems
Workpiece Holding Clamping Systems

BERG-Spanntechnik offers an extensive range of power operated chucks and hydraulic cylinders which meet all the requirements of modern CNC lathes as there are effective clamping force, attainable numbers of rotation, and precision, as well as center hole width for bar stock.

HLZE Tool Clamping Cylinders
HLZE Tool Clamping Cylinders

HLZE hydraulic cylinders are designed for release and ejection of the tools in conjunction with spring actuated tool clamping devices and for stationary fitting. The HLZE series is used for applications in which the spindle bearing must not be submitted to the load of the actuation forces during tool changing.

Capto Clamping Systems
Capto Clamping Systems

BERG Spanntechnik is a leading supplier of Capto grippers and clamping systems.

SKVZ Tool Clamping Cylinders
SKVZ Tool Clamping Cylinders

SKVZ locking heads are designed for limiting the springing out resilience of the tools to the elastic yield of the connection elements when the axially acting cutting force components are larger than the clamping force on spring actuated tool clamping and chucking systems.

Page loaded in 0.1101 seconds.