455.110.K63.IGX
KM Master Setting Gauges - KM63 (Integrex)
Full Data Sheet (455.K00)
PDF Data Sheet: KM Master Setting Gauges (455.K00)| Taper | L (mm) | D (mm) | f1 | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| KM40 (ISO 26622) | 60 | 40 | 25 | 455.110.K40.000 | ||||
| KM50 (ISO 26622) | 60 | 50 | 35 | 455.110.K50.ISO | ||||
| KM63 (Integrex) | 65 | 63 | 45 | 455.110.K63.IGX | ||||
| KM63 (ISO 26622) | 65 | 63 | 45 | 455.110.K63.ISO | ||||
| KM6350 | 65 | 63 | 45 | 455.110.K65.000 | ||||
| KM80 (TS, ISO 26622) | 80 | 80 | 50 | 455.110.K80.ISO | ||||
| KM100 (ISO 26622) | 85 | 100 | 60 | 455.110.K90.ISO |
For more information regarding this item (KM Master Setting Gauges - KM63 (Integrex)) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Certified Master Taper Gauge
These taper master gauges can be used for zeroing the dial indicators on our HSK Tool Holder Inspection Gauges.
KM Tool Changer Alignment Gauges
Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder.
In addition, mis-clamping and dropped tools can also occur.
KM gauges are available for ISO 26622 as well as Mazak Integrex flanges.
Sets include taper and flange, axial and radial alignment pins, and a padded carrying case.
Tool Holder Taper Check Gauges
<b>This product has been replaced by gauge 430.124.</b> <a href="http://tacrockford.com/product/gauges/tool-holder-taper/steep-taper/tool-holder-taper-inspection-gauges/">Click here to link to this product.</a>
<b>Features</b>
-Maximize tool life and spindle life
-Ensure tool holder performance
-Tool holder can be tested with components assembled, and works with retention knob installed
-Includes (A) and (B) indicators with 0.0001" resolution
-Carbide locating pins for long life
-Made with hardened tool steel body
-Comes with master shank (C)
KM Taper Identification
Kennametal's KM tooling system comes in several different varieties. The size is defined by the tool change flange diameter. For example, KM63 holders have a 63mm diameter flange.
Types include KM ISO (KM TS™), KM XMZ™, KM 4X™, KM NTC, and KM ATC™
Download our identification guide below.
HSK Dial Indicator Spindle Taper Gauge Manual
Instruction manual for the dial indicator spindle taper gauge (410.310)
Tool Holder Taper Inspection Gauge
Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)
The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.
Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.
The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.
Submit your feedback