639.563.063.100 HSK-C Tool Holder Blanks - HSK-C 63

HSK-C63 Tool Holder Blank

- Contact us for other HSK sizes, diameters, lengths, and other special requirements. - Taper on standard blanks is finish hardened; blank portion not hardened. - DIN333 Form B center on blank end.

HSK-C Tool Holder Blanks (Click image to enlarge)

Full Data Sheet (639.525)

PDF Data Sheet: HSK-C Tool Holder Blanks (639.525)

Details Ask a Question Request a Quote

Product	Tool Holder
Part Type	Blank
Taper / Standard	HSK-C
Taper Size	63
D (mm)	63
L (mm)	100
d1 (mm)	63
f5 (mm)	12.5
Standard	ISO 12164-1 / DIN 69893 / ASME B5.62

Taper	L (mm)	D (mm)	d1 (mm)	f5 (mm)	Standard	Part Number
HSK-C25...100 Custom Size					Contact us with your requirements	639.500.SP
HSK-C 25	100	25	25	8	ISO 12164-1 / DIN 69893 / ASME B5.62	639.525.025.100
HSK-C 32	100	32	32	10	ISO 12164-1 / DIN 69893 / ASME B5.62	639.532.032.100
HSK-C 32	150	50	32	10	ISO 12164-1 / DIN 69893 / ASME B5.62	639.532.050.150
HSK-C 40	100	40	40	10	ISO 12164-1 / DIN 69893 / ASME B5.62	639.540.040.100
HSK-C 40	200	40	40	10	ISO 12164-1 / DIN 69893 / ASME B5.62	639.540.040.200
HSK-C 40	150	63	40	10	ISO 12164-1 / DIN 69893 / ASME B5.62	639.540.063.150
HSK-C 50	100	50	50	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.550.050.100
HSK-C 50	200	50	50	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.550.050.200
HSK-C 50	100	63	50	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.550.063.100
HSK-C 50	200	63	50	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.550.063.200
HSK-C 50	175	80	50	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.550.080.175
HSK-C 63	100	63	63	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.563.063.100
HSK-C 63	200	63	63	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.563.063.200
HSK-C 63	160	80	63	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.563.080.160
HSK-C 63	200	80	63	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.563.080.200
HSK-C 63	175	100	63	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.563.100.175
HSK-C 80	200	80	80	16	ISO 12164-1 / DIN 69893 / ASME B5.62	639.580.080.200
HSK-C 100	100	100	100	16	ISO 12164-1 / DIN 69893 / ASME B5.62	639.590.100.100

For more information regarding this item (HSK-C Tool Holder Blanks - HSK-C 63) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK-T Tool Holder Blanks

HSK-T tool holder blanks made to ICTM standard / ISO 12164-3

HSK-T blanks have tighter tolerances on the drive key slots, however they can in most cases also be used in HSK-A spindles.

HSK-A 80 to 125 Tool Holder Blanks

<a href="https://tacrockford.com/product/tool-holders/blanks/hsk-taper/hsk-a25-to-63-tool-holder-blanks/">This data sheet has moved. Click here to go to data sheet 619.525.</a>

HSK-F Tool Holder Blanks

TAC Rockford stocks HSK-F63 blanks. Other sizes are available on request.

HSK-A Tool Holder Blanks

TAC Rockford stocks HSK-A32, HSK-A40, HSK-A50, HSK-A63, HSK-A80, HSK-A100, and HSK-A125 in a variety of diameters and lengths. HSK-A160 blanks are available on request as well.

KM Tool Holder Blanks

Weinig Tool Holder Blanks

HSK-C Tool Holder Blanks

- Contact us for other HSK sizes, diameters, lengths, and other special requirements.
- Taper on standard blanks is finish hardened; blank portion not hardened.
- DIN333 Form B center on blank end.

HSK-E Tool Holder Blanks

TAC Rockford stocks HSK-E32, HSK-E40, HSK-E50, and HSK-E63 blanks in a variety of diameters and lengths. Other sizes are available
- contact us with your requirements.

PSC/PSK Tool Holder Blanks

- Contact us for other PSK sizes, diameters, lengths, and other special requirements.

- Taper on standard blanks is finish hardened; blank portion not hardened.

639.563.063.100

HSK-C Tool Holder Blanks - HSK-C 63

Related