495.200.028.003
D28 Chuck Force Gauges - Wired
Measures the holding force on turning-centers, chucks, or lathes
| Measuring Diameter | Jaws | Diameter | Force Range (per Jaw) | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| D28 | 2 / 3 | 28 mm / 1.10 in. | 0...15kN / 3,400 lb-F | 495.200.028.003 | ||||
| D28 (Low Force) | 2 / 3 | 28 mm / 1.10 in. | Contact us | 495.200.028.003.LF | ||||
| D72 | 2 / 3 | 72 mm / 2.83 in. | 0...50kN / 11,200 lb-F | 495.200.072.003 | ||||
| D72 (Low Force) | 2 / 3 | 72 mm / 2.83 in. | Contact us | 495.200.072.003.LF | ||||
| D125 | 2 / 3 / 4 | 125 mm / 4.92 in. | 0...65kN / 14,600 lb-F | 495.200.125.004 | ||||
| D125 (Low Force) | 2 / 3 / 4 | 125 mm / 4.92 in. | Contact us | 495.200.125.004.LF | ||||
| D200 | 2 / 3 / 4 / 6 | 200 mm / 7.87 in. | 0...100kN / 22,500 lb-F | 495.200.200.006 | ||||
| D200 (Low Force) | 2 / 3 / 4 / 6 | 200 mm / 7.87 in. | Contact us | 495.200.200.006.LF |
ForceCheck Force Gauge Base Set - Wired
Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
| Part Number | ||||||||
|---|---|---|---|---|---|---|---|---|
| ForceCheck Base Set | 461.310.000.000 |
Chuck Force Sensor Extensions and Accessories
Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.
For more information regarding this item (D28 Chuck Force Gauges - Wired) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Chuck Force Gauges - Wired
Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.
Large Diameter VTL Chuck Force Gauges
Measure clamping force on 12+ inch diameter chucks. Available as wired or wireless sensor unit. Base set is separate which includes wired or wireless read-out display, custom case, and accessories for the sensor.
HSK Drawbar Force Gauge Sensors, Wired
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
HSK Taper Wired Force Measuring Bars
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
Chuck Force Sensor Extensions and Accessories
Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.
Senso 3000 Hydraulic Tool Holder Force Gauge
The SENSO 3000 is a specialized tool for verifying correct operation of hydraulic tool holders. For workholding collet force gauges, please see our ForceCheck collet force gauges.
SENSO 3000 determines the clamping force of the hydraulic chuck via a pressure sensitive plug gauge. The entire length of the plug gauge is clamped in the hydraulic chuck so that when tightening the clamping screw the clamping pressure of the chuck is optimally applied. The clamping force measuring instrument displays the clamping force as an absolute measurement value on the one hand and as a percentage clamping force in relation to a reference value that can be set individually on the other. This way, SENSO 3000 can be adapted to customer specific application conditions and requirements.
The clamping force measuring instrument is supplied with a plug gauge for the respective clamping diameter as well as a carbide proofing bar for calibration purposes and a CR 2430 type battery – all in a sturdy and handy case.
HSK Drawbar Force Gauge Complete Sets, Wired
Wired complete sets include corresponding drawbar force gauge, display readout unit, connecting cable for wired unit, special carrying case, and certificate.
Wireless Chuck Force Gauges
The ForceCheck wireless chuck force gauge is designed to quickly and accurately measure holding force and speed on chucks. Verifying chuck holding force allows manufacturers to improve the repeatability of a manufacturing process by checking actual holding force under dynamic (rotating) conditions, as well as perform critical preventative maintenance checks. Contact us for other clamping diameters and extension rings, as well as 4+ jaw chucks.
Lathe Spindle Face Ring
Series 492.026 ring gauges are for lathe spindle face.
Steep Taper (CAT/ANSI) Wired ForceCheck Sensors
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
Submit your feedback