461.200.192.000 ForceCheck HSK-A/C/E 125 Measuring Bar

Zoom Enlarge Image

HSK32, HSK63, & HSK100 ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

HSK-A/C/E63 ForceCheck, Drawbar Force Sensor (Click image to enlarge)

HSK40 & HSK63 ForceCheck Sensors with display, cable and case (Click image to enlarge)

Full Data Sheet (461.200.1)

PDF Data Sheet: HSK Drawbar Force Gauge Sensors, Wired (461.200.1)

Details Ask a Question Request a Quote

ForceCheck Sensor, Wired								Part Number
Drawbar Force Sensor HSK-A/C/E 25								461.200.125.000
Drawbar Force Sensor HSK-A/C/E 32 and B/D/F 40								461.200.132.000
Drawbar Force Sensor HSK-A/C/E 40 and B/D/F 50								461.200.140.000
Drawbar Force Sensor HSK-A/C/E 50 and B/D 63								461.200.150.000
Drawbar Force Sensor HSK-A/C/E 63 and B/D/F 80								461.200.163.000
Drawbar Force Sensor HSK-A/C 80 and B/D 100								461.200.180.000
Drawbar Force Sensor HSK-A/C 100 and B/D 125								461.200.190.000
Drawbar Force Sensor HSK-A 125								461.200.192.000
Drawbar Force Sensor HSK-A 160								461.200.196.000
Drawbar Force Sensor HSK-F 63								461.200.663.000

ForceCheck Force Gauge Base Set - Wired

Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.

Details PDF (461.310)

								Part Number
ForceCheck Base Set								461.310.000.000

For more information regarding this item (ForceCheck HSK-A/C/E 125 Measuring Bar) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK Taper Protector Sealing Plugs

Available for HSK 32, 40, 50, 63, 80, 100, 125

Steep Taper (DIN) Drawbar Force Gauges

Measuring bars, complete sets, and base sets for Steep Taper (SK) DIN standard. Metric or inch retention knob / pull-stud threading available on each measuring bar.

Steep Taper (CAT/ANSI) Drawbar Force Gauges

Measuring bars, complete sets, and base sets for Steep Taper (SK) CAT-ANSI. Metric or inch retention knob / pull-stud threading available on each measuring bar.

HSK-A Basic Adapters for Modular Tooling

Interchangeable with C.O. system. Available for HSK-A 50, 63, 80, 100, 125.

HSK Taper Wired Force Measuring Bars

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Tool Holder Drive Key Tool Taper Gauges

Available for HSK 32, 40, 50, 63, 80, 100, 125, 160

HSK-A to HSK-A/C Extensions and Reducing Adapters

For DIN 69 893-1 Form A and C tool holders. Prepared for MAPAL clamping system. Available for HSK-A 50, 63, 80, 100, 125.

Senso 3000 Hydraulic Tool Holder Force Gauge

The SENSO 3000 is a specialized tool for verifying correct operation of hydraulic tool holders. For workholding collet force gauges, please see our ForceCheck collet force gauges.

SENSO 3000 determines the clamping force of the hydraulic chuck via a pressure sensitive plug gauge. The entire length of the plug gauge is clamped in the hydraulic chuck so that when tightening the clamping screw the clamping pressure of the chuck is optimally applied. The clamping force measuring instrument displays the clamping force as an absolute measurement value on the one hand and as a percentage clamping force in relation to a reference value that can be set individually on the other. This way, SENSO 3000 can be adapted to customer specific application conditions and requirements.

The clamping force measuring instrument is supplied with a plug gauge for the respective clamping diameter as well as a carbide proofing bar for calibration purposes and a CR 2430 type battery – all in a sturdy and handy case.

HSK-A 80 to 125 Tool Holder Blanks

<a href="https://tacrockford.com/product/tool-holders/blanks/hsk-taper/hsk-a25-to-63-tool-holder-blanks/">This data sheet has moved. Click here to go to data sheet 619.525.</a>

Collet Force Gauges

The original ForceCheck collet force gauge has been replaced by application-specific versions. 

For hydraulic tool holders and milling chucks:
<a href="https://tacrockford.com/product/gauges/force-check/hydraulic-tool-holder-force-gauges/">Series 495.250 ForceCheck Hydraulic Tool Holder Force Gauges</a>

For workholding collets:
<a href="https://tacrockford.com/product/gauges/workholding/forcecheck-worholding-collet-force-gauge/">Series 495.245 ForceCheck Workholding Collet Force Gauge</a>

With the ForceCheck collet force gauge, the clamping forces on collets and hydraulic tool holders can be measured to obtain accurate machining specifications while fulfilling ISO standard requirements.

Available in complete sets for 1/4, 1/2, 3/4, 1, 10 mm, 16 mm, 20 mm, 25 mm and other diameters.

The ForceCheck collet force gauge allows tool holder and workholding collet holding force to be quickly and easily measured.

Because it is problematic to measure, this critical holding force is typically not checked, even though it plays an important role in manufacturing repeatability.

TAC Rockford, makers of the ForceCheck drawbar clamping measurement system, offers a simple, efficient, and consistently accurate collet force measurement unit.

With this system you can accurately and consistently measure the clamping forces on collets and hydraulic tool holders to obtain accurate machining specifications while fulfilling your company's or customer's ISO standard requirements.

Complete sets include a durable display with standard 9 volt battery, connecting cable, carrying case, and measuring bar.

Individual measuring bars for any size diameter are available.

461.200.192.000

ForceCheck HSK-A/C/E 125 Measuring Bar