683.4581.038.000
HSK-C Front Adapter Flanges - HSK-C 50
Full Data Sheet (683.581)
PDF Data Sheet: HSK-C Front Adapter Flanges (683.581)| Product | Tool Holder |
| Part Type | Adapter Flange |
| Taper / Standard | HSK |
| Taper Size | 50 |
| Ø (d2) | 80 |
| Length (l1) | 27.5 |
| l2 | 36.0 |
| d3 | 46 |
| SW | 4.0 |
| Taper (d1) | Length (l1) | Ø (d2) | l2 | d3 | SW | Part Number | ||
|---|---|---|---|---|---|---|---|---|
| HSK-C 25 | 20.0 | 45 | 26.5 | 23 | 2.0 | 683.4581.019.000 | ||
| HSK-C 32 | 17.5 | 55 | 23.0 | 28 | 2.5 | 683.4581.024.000 | ||
| HSK-A/C40 | 22.5 | 63 | 29.0 | 36 | 3.0 | 683.4581.030.000 | ||
| HSK-C 50 | 27.5 | 80 | 36.0 | 46 | 4.0 | 683.4581.038.000 | ||
| HSK-C 63 | 35.0 | 100 | 46.0 | 56 | 5.0 | 683.4581.048.000 | ||
| HSK-C 80 | 45.0 | 125 | 58.0 | 66 | 6.0 | 683.4581.060.000 | ||
| HSK-C 100 | 57.0 | 160 | 72.0 | 86 | 8.0 | 683.4581.075.000 |
For more information regarding this item (HSK-C Front Adapter Flanges - HSK-C 50) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-C Front Adapter Flanges
- Includes clamping set
- Includes brass locking ring
- Includes indexing pin and retention screw
HSK-C Locking Rings for Adapter Flanges
Available for HSK-C 25, 32, 40, 50, 63, 80, 100
KS Adapter Flanges
Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100
KS Adapter Flanges with Angular Alignment
For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges for Short Spindles
With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.
HSK Manual Clamping Grippers with Axial Drive
The Axialspanner comes for clamping disc-shaped tools (grinding wheels, saw blades) on HSK-flanges used. With low tension moments high clamping forces are generated, which are more than 50% above the recommended for HSK shanks values. Depending on the application of the AXS is centrally operated from the front through a tool flange or from the rear through the spindle.
KS Adapter Flanges with Angular Alignment
Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges with Radial Alignment
Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.
HSK-E/F CAM-Actuated Flanges
Series 363.048 flanges use a unique cam-actuated clamping cartridge that actuates behind the taper.
These flanges are intended for HSK-E/HSK-F tools that do not have drive keys on the taper, however they are also compatible with HSK-A/HSK-C.
Submit your feedback