683.4741.008.063
HSK-A 63 MQL HSK-A Heat Shrink Fit Chucks for Automatic Tool Change
Product | Tool Holder |
Part Type | Heat Shrink |
Taper / Standard | HSK-A |
Taper Size | 63 |
Ø h6 (d1) | 8 |
Length (l1) | 80 |
For more information regarding this item (HSK-A 63 MQL HSK-A Heat Shrink Fit Chucks for Automatic Tool Change) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
MQL HSK-A Heat Shrink Fit Chucks for Automatic Tool Change
- New MQL standard
- l2 plug-depth at DIN 6535
- For 1-channel systems
- Balancing quality G6.3 / 15,000 rpm.
- For shank tolerance h6
MQL HSK-A Heat Shrink Fit Chucks for Manual Tool Change
- New MQL standard, l2 is plug-in depth at DIN 6535
- For 1-channel systems
- Balancing quality: G 6.3 / 15,000 rpm
- For shank tolerance h6
HSK-A Heat Shrink Fit Chucks
- Balancing quality G6.3 at 15,000 rpm
- MQL suitable
- For tool shank tolerance h6
- To DIN 69882-8
MQL HSK-A Hydraulic Chucks for Automatic Tool Change
Available for HSK-A 50, 63, 100
Power Clamp Preset Network Heat Shrink Systems
The Power Clamp Preset Network is based on the time-tested Power Clamp Preset. It is equipped with a PC that acts as the interface to your tool management and controls the shrink fit operation as well.
HSK-E Heat Shrink Fit Chucks
- Balancing quality G6.3 / 15,000 rpm.
- For tool shank tolerance h6
HSK-A i-tec Shrink Fit Chucks Ultra Short Version
Available for HSK-A 63
HSK-A i-tec Shrink Fit Chucks Slim Version
Available for HSK-A 63, 100
HSK-C i-tec Shrink Fit Chucks Standard Version
Available for HSK-C 40, 50, 63
HSK-E i-tec Shrink Fit Chucks Extremely Slim Version
Available for HSK-E 40