683.582.048.100
HSK PowerClamp Adapter Flanges for Turning Machines - HSK-C 63
Full Data Sheet (683.582)
PDF Data Sheet: HSK PowerClamp Adapter Flanges for Turning Machines (683.582)| Product | Tool Holder |
| Part Type | Adapter Flange |
| Taper / Standard | HSK |
| Taper Size | 63 |
| Ø (d2) | 100 |
| Length (l1) | 40 |
| d3 | 63 |
| l2 | 64.5 |
| l3 | 70 |
| SW | 5 |
| Version | Left |
| Taper (d1) | Length (l1) | Ø (d2) | d3 | l2 | l3 | SW | Version | Part Number |
|---|---|---|---|---|---|---|---|---|
| HSK-C 63 | 40 | 100 | 63 | 64.5 | 70 | 5 | Right | 683.4582.048.200 |
| HSK-C 50 | 35 | 84 | 50 | 55.0 | 55 | 4 | Left | 683.582.038.100 |
| HSK-C 50 | 35 | 84 | 50 | 55.0 | 55 | 4 | Right | 683.582.038.200 |
| HSK-C 63 | 40 | 100 | 63 | 64.5 | 70 | 5 | Left | 683.582.048.100 |
For more information regarding this item (HSK PowerClamp Adapter Flanges for Turning Machines - HSK-C 63) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK PowerClamp Adapter Flanges for Turning Machines
- For fixed tools
- Includes setting element to eliminate drive play with vertical tools
- Includes clamping set
- Includes brass locking ring
- Includes indexing pin and retention screws
HSK-C Locking Rings for Adapter Flanges
Available for HSK-C 25, 32, 40, 50, 63, 80, 100
KS Adapter Flanges
Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100
KS Adapter Flanges with Angular Alignment
For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges for Short Spindles
With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.
KS Adapter Flanges with Angular Alignment
Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges with Radial Alignment
Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.
HSK-E/F CAM-Actuated Flanges
Series 363.048 flanges use a unique cam-actuated clamping cartridge that actuates behind the taper.
These flanges are intended for HSK-E/HSK-F tools that do not have drive keys on the taper, however they are also compatible with HSK-A/HSK-C.
Submit your feedback