541.001

TRIBOS SVP-2 Manual Pump Clamping Device

Design with manual pump for quick actuation and frequent tool changes

TRIBOS SVP-2 Manual Pump Clamping Device (Click image to enlarge)
TRIBOS SVP-2 Manual Pump Clamping Device (Click image to enlarge)

Design with manual pump for quick actuation and frequent tool changes.

PDF Data Sheet: TRIBOS SVP-2 Manual Pump Clamping Device (541.001)

TRIBOS SVP-2 Assembly and Operating Manual
TRIBOS SVP-2 Assembly and Operating Manual

Design with manual pump for quick actuation and frequent tool changes.

Details PDF (541.001M)

1.) Mount for length measuring system to pre-set the tool.
2.) Pressure indicator for monitoring of the actuating pressure.
3.) Drain valve for releasing.
4.) Manual pump for quick and exact setting of the actuation pressure (clamping).
5.) Design combines outstanding ergonomics with a modern look.

Instructions for clamping/releasing TRIBOS toolholders in SVP-2:1. Insert the toolholder with reduction sleeve in clamping device.
2. Make sure valve is closed on the fixture housing.
3. Generate the necessary clamping pressure with the handle.
4. The tool can be inserted or removed.

See Operating Manual PDF for complete instructions.

TRIBOS SVP-2DUnit with adjustable pressure limitation.


TRIBOS SVP-2 Assembly and Operating Manual
TRIBOS SVP-2 Assembly and Operating Manual

Design with manual pump for quick actuation and frequent tool changes.

Details PDF (541.001M)

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (TRIBOS SVP-2 Manual Pump Clamping Device) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

TRIBOS SVP-2 Assembly and Operating Manual
TRIBOS SVP-2 Assembly and Operating Manual

Design with manual pump for quick actuation and frequent tool changes.

TRIBOS Application Example with SRE-R and SVP
TRIBOS Application Example with SRE-R and SVP

An example TRIBOS application with SRE-R inserts and SVP clamping devices.

TRIBOS SVP-4 Automatic Clamping Device
TRIBOS SVP-4 Automatic Clamping Device

Automatic clamping device for user-friendly reliable automatic actuation. Reliable clamping due to pre-set clamping pressure and clamping process only takes seconds.

KS Clamping Cartridges (Standard)
KS Clamping Cartridges (Standard)

Available HSK-C 32, 40, 50, 63, 80, 100

KS Clamping Cartridges for Minimal Lubrication (MLC)
KS Clamping Cartridges for Minimal Lubrication (MLC)

Available for HSK-C 40, 50, 63, 80, 100

Wireless Chuck Force Sensor Manual
Wireless Chuck Force Sensor Manual

The ForceCheck chuck force gauge is designed to measure the clamping forces created by a chuck. The wireless sensor can be used for either static (non-rotating) or dynamic (rotating) measurements. When rotating, the sensor can also measure RPM (Revolutions Per Minute).

Hydraulic Power Stations for Hydraulic Quick Die Clamping Systems
Hydraulic Power Stations for Hydraulic Quick Die Clamping Systems

Hydraulic power stations for quick die clamping systems are designed for actuating hydraulic clamping elements in the forming presses. A large number of electro-hydraulic (HA) or air-hydraulic power stations (HAL) are available depending on the use of the clamping elements and/or hydraulics on the press plunger or on the table, as well as the number of clamping elements.

Rear-Clamp Manual Clamping Cartridges
Rear-Clamp Manual Clamping Cartridges

355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.

Wireless Gauge Display Manual
Wireless Gauge Display Manual

The ForceCheck Wireless Display is designed for use in conjunction with ForceCheck wireless sensors. The display shows the force, RPM, or other output transmitted by a connected sensor.

Page loaded in 0.1652 seconds.