694.1742.102

Horizontal Engineer Level, 200mm, Sensitivity 0.04mm/m

Electronic Horizontal Level 160mm, 0.01 mm/m

Standard horizontal engineer's level per DIN 877

Special cast-iron base with insulated pads. 4 measuring faces, 3 with V grooves. Longitudinal and lateral vials. Carrying case included. Made in Germany. Additional sensitivities available: 0.3, 0.1, 0.02, and 0.01 mm/m (contact us for further information). Levels for large shaft-diameter or with magnetic faces available on request.

Electronic Horizontal Level 160mm, 0.01 mm/m (Click image to enlarge)

Electronic Horizontal Level with case (Click image to enlarge)

Machinist Precision Horizontal Levels (Click image to enlarge)

Full Data Sheet (694.1740)

PDF Data Sheet: Machinist Precision Horizontal Levels (694.1740)

Details Ask a Question Request a Quote

Product	Gauge
Part Type	Machine Center Dimensional
Taper / Standard	200
Width (mm)	42
Sensitivity (mm/m)	0.04

Size (mm)	Width (mm)	Sensitivity (mm/m)	Part Number
160	42	0.04	694.1742.101
200	42	0.04	694.1742.102
250	42	0.04	694.1742.103
300	51	0.04	694.1742.104
500	51	0.04	694.1742.105

For more information regarding this item (Horizontal Engineer Level, 200mm, Sensitivity 0.04mm/m) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Machinist Precision Horizontal Levels

Special cast-iron base with insulated pads. 4 measuring faces, 3 with V grooves. Longitudinal and lateral vials. Carrying case included. Made in Germany.

Additional sensitivities available: 0.3, 0.1, 0.02, and 0.01 mm/m (contact us for further information).
Levels for large shaft-diameter or with magnetic faces available on request.

Machinist Precision Square Levels

Special cast-iron frame with insulated pads. 4 measuring faces, 3 with V grooves. Longitudinal and lateral vials. Carrying case included. Made in Germany.

Additional sensitivities available: 0.3, 0.1, 0.02, and 0.01 mm/m (contact us for further information).
Levels for large shaft-diameter or with magnetic faces available on request.

Power Clamp Nano Heat Shrink Systems

The all new Power Clamp Nano is your entry into the world of micro machining.
The new shrink fit machine was specifically developed for small interfaces, i.e. HSK 25, HSK 50 and SK/BT 30. The horizontal design ensures easy handling especially at tools with smaller diameters. By its modular system construction Power Clamp Nano fulfills the various customer requirements very well.

HSK Clamp Style Benchtop Mounting Fixtures

Clamp style unit for horizontal and vertical use. Includes clamping flange and clamping sleeve. Other configurations and clamping fixtures for standard taper tools are also available.

Hydrostatic Slides

- Very low friction, no friction at positioning
- Movement of 0.1 micro-m possible
- No reversal backlash of friction force

Automatic Filter Devices

The soiled cooling lubricant is conveyed onto the non-woven filter lying in a cavity, via a liquid feed distributor. Owing to the gravitational force the coolant flows through the non-woven filter into a liquid container beneath the band filter. The dirt particles contained in the cooling lubricant are filtered out by the non-woven filter and accumulate in the form of a sludge cake on it. This causes a reduction of the permeability of the filter paper and, therefore, an increase of the liquid level above the filter cavity.

Series 15595.237 Mounting Fixtures

Series 15595.237 tool holder mounting fixtures provide both horizontal and vertical fixturing. Available for PSK/PSC, HSK, and Steep Taper.

Internal Bed Filters

This type of filter can be used in all treatments where small chips and fine particles are to be filtered out of liquids even if these are of a rather high viscosity. This type of filter has proved its worth and efficiency not only in machining stations, but also in grinding machines, honing machines and wash water conditioning. This filter can be used as an individual system, but also for supplying several machines simultaneously.

Runout Arbor Upright Storage Cases

Our most popular case, the upright storage case protects a runout arbor from dirt and damage. The arbor rests vertically in the case, suspended from the flange. Upright storage of runout arbors is recommended
-- the upright case has foam guides that allow horizontal use if preferred. Case is available in tall and short configurations depending on arbor length. Case is made of 9 ply Baltic Birch.

MQL-Check Coolant Volume Measuring Instruments

The development of the new MQL-Check allows simple and quick measuring of the coolant volume and the reaction time with minimal quantity lubrication (MQL) directly at the tool point. For the user, the result is a considerable increase in process reliability with MQL machining.