683.947
Guhring HSK External Taper Cleaning Wipers
For cleaning the external taper and face.
PDF Data Sheet: Guhring HSK External Taper Cleaning Wipers (683.947)
For more information regarding this item (Guhring HSK External Taper Cleaning Wipers) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Tool Holder Taper Wipers
Used for cleaning the external taper and face.
Steep Taper Spindle Wipers
Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.
Tool Taper Cleaning Machines
Keep precision at the spindle interface by keeping tool holders clean: The required cleaning unit is simply placed on the drive unit and the taper cleaning device is immediately ready for use.
HSK Spindle Wipers
Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.
Cylindrical Cleaning Mandrels
For cleaning the bore of the tool holder. e.g. hydraulic chucks and shrink fit chucks.
Continuous Re-Cooling Power Units
The Re-Cooling Plant is easy to open for cleaning in applications where contaminated materials are processed. The lateral air aspiration device for the condenser is positioned at the top, which makes the dirt accumulations inside the condenser easy to see and, thus, easy to clean. Upon request, it is available with an air filter fitted to the condenser.
Submit your feedback