465.V40.000.000

VDI 40 Runout Test Bar, per DIN 69880

VDI Test Bar - DIN 69880

Per DIN 69880 standard

Lathe turret alignment bar for VDI interface. Used for both testing concentricity of the interface as well as center alignment and adjustment on a lathe. Made to DIN 69880 standard. 465.V50.59767 is a special configuration used on certain Mazak machines. Contact us for further information. Contact us for other sizes or special requirements/configurations.

Full Data Sheet (465.V00)

PDF Data Sheet: VDI Lathe Turret Alignment Bars (465.V00)

Details Ask a Question Request a Quote

DIN 69880	d1 (mm)	d3 (mm)	L1 (mm)	Part Number
VDI Special Configuration	Contact us with your requirements			465.V00.SP
VDI 16	16	30	120	465.V16.000.000
VDI 20	20	40	150	465.V20.000.000
VDI 25	25	40	150	465.V25.000.000
VDI 30	30	Contact Us		465.V30.000.000
VDI 40	40	40	200	465.V40.000.000
VDI 50	50	Contact Us		465.V50.000.000
VDI 50 Mazak	50	40	217	465.V50.59767
VDI 60	60	40	200	465.V60.000.000

For more information regarding this item (VDI 40 Runout Test Bar, per DIN 69880) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

VDI Lathe Turret Alignment Bars

Lathe turret alignment bar for VDI interface. Used for both testing concentricity of the interface as well as center alignment and adjustment on a lathe. Made to DIN 69880 standard.

465.V50.59767 is a special configuration used on certain Mazak machines. Contact us for further information.

Contact us for other sizes or special requirements/configurations.

VDI to HSK-C Basic Adapter Flanges

- For fixed, centered tools
- Includes clamping set
- Includes brass locking ring

HSK Spindle Runout Test Arbors

- Maximum runout error 0.003mm / 3 micron / 0.00012 inch.

- Carrying cases are not included. Visit Data Sheet 465.006 for available case styles.
- A certificate of accuracy is included. Traceable certificates available; contact us for details.
- Contact us for other lengths, tapers, and other special requirements.

PSC / PSK Spindle Runout Test Arbors

Made to the ISO 26623 Standard. Maximum runout error 0.003mm / 3 micron / 0.00012”. A certificate of accuracy is included. Storage are cases not included.

R8 Taper Spindle Runout Test Arbor

Standard R8 spindle runout test arbor with inch retention thread.

Runout <=0.003 micron (0.00012 inch)

Steep Taper Standard Ball-End Runout Test Arbors

Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).

Spindle Runout Test Arbors

-Maximum runout error 0.003mm / 3 micron / 0.00012 inch
-Cylindricity ≤ 0.002mm / 2 micron / 0.00008 inch
-Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).
-A certificate of accuracy is included. Traceable certificates available; contact us for details.
-Contact us for other lengths, tapers, and other special requirements.

KM Spindle Runout Test Arbors

- Maximum runout error 0.003mm [0.00012 in.]

- Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).

- A certificate of accuracy is included. Traceable certificates available; contact us for details.

- Contact us for other lengths, tapers, and other special requirements.

* ISO 26622 runout arbor tapers are compatible with machines using TS, XMZ (Mazak Integrex), and ATC. Flange may not be suitable for use with automatic tool changers.