293-GS

BERG Transfer Rail Couplings

The mechanical self-locking Berg gripper rail coupling GSM is designed for manual coupling of gripper rails on transfer presses. A vertical lift-out stroke is required for changing the tool.

PDF Data Sheet: BERG Transfer Rail Couplings (293-GS)

GSMManual operated Transfer Rail Coupling Eccentric Cam Style

The mechanical self-locking Berg gripper rail coupling GSM is designed for manual coupling of gripper rails on transfer presses. A vertical lift-out stroke is required for changing the tool.

GSM-WManual operated Transfer Rail Coupling Swing Out Style

The mechanical self-locking Berg gripper rail coupling GSM-W is designed for manual coupling of gripper rails on transfer presses. A short lift-out stroke is required for changing the tool. An axial stroke is required in the event of additional centring with pins.

GSE (AS-I)Electromechanical Transfer Rail Coupling

The electro-mechanical Berg gripper rail coupling GSE is designed for automatic coupling of gripper rails on transfer presses. A vertical lift-out stroke is required for changing the tool.

GSE-K (AS-I)Electromechanical Transfer Rail Coupling

The electro-mechanical Berg gripper rail coupling GSE-K is designed for automatic coupling of gripper rails on transfer presses. An axial stroke is required for changing the tool.

GSHHydromechanical Self-locking Transfer Rail Coupling

The hydromechanical Berg gripper rail coupling GSH is designed for automatic coupling of gripper rails on transfer presses. A vertical lift-out stroke is required for changing the tool.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BERG Transfer Rail Couplings) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Hydro-mechanical Self-locking Transfer Rail Couplings
Hydro-mechanical Self-locking Transfer Rail Couplings

The hydromechanical self-locking gripper rail coupling is designed for automatic coupling of gripper rails on transfer presses. A vertical lift-out stroke is required for changing the tool. The coupling consists of a hard anodized aluminum housing, an axially movable tensioning rod and a hydromechanical self-locking clamping gearing. This configuration allows for high clamping forces and features a very high dynamic rigidity with minimum mass.

Electromechanical Transfer Rail Couplings
Electromechanical Transfer Rail Couplings

The electro-mechanical gripper rail coupling is designed for automatic coupling of gripper rails on transfer presses. A vertical lift-out stroke is required for changing the tool. The coupling consists of a hard anodized aluminum housing, an axially movable tensioning rod and an electromechanical self-locking helical gearing. This configuration achieves a very high repeat precision, high clamping forces, and features dynamic rigidity with low mass.

Manually Operated Eccentric Cam Style Transfer Rail Couplings
Manually Operated Eccentric Cam Style Transfer Rail Couplings

The mechanical self-locking gripper rail coupling is designed for manual coupling of gripper rails on transfer presses. A vertical life-out stroke is required for changing the tool. The coupling consists of a hard anodized aluminum housing, an axially movable tensioning rod and a self-locking eccentric cam gearing. This configuration allows high clamping forces and features a high dynamic rigidity with minimum mass.

Manually Operated Swing-out Style Transfer Rail Couplings
Manually Operated Swing-out Style Transfer Rail Couplings

The mechanical self-locking swing-out style gripper rail coupling is designed for manual coupling of gripper rails on transfer presses. A short lift-out stroke is required for changing the tool. An axial stroke is required in the event of additional centering with pins. The coupling consists of a hard anodized aluminum housing, a swiveling tensioning rod and a self-locking eccentric cam gearing. This configuration allows high clamping forces and features a high dynamic rigidity with minimum mass.

Overview: Clamping Systems with AS-Interface
Overview: Clamping Systems with AS-Interface

The BERG AS-Interface clamping and chucking systems are intended for clamping various tools/dies on press slides and black holders, and for sliding table clamping and gripper rail couplings on multiple die presses. They are used on new machines and for retrofitting automatic clamping systems in existing press lines.

BERG Pallet Holding Force Gauges
BERG Pallet Holding Force Gauges

Includes measuring case, display unit, measuring cartridge, test certificate, and clamping head specific pull studs

Serrated Locking Plates
Serrated Locking Plates

Serrated Locking Plates do not offer the high precision of Hirth couplings, but offer a cost-effective solution for positioning applications. The range of designs makes these plates adaptable for almost any application. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts. Contact us for further information.

Page loaded in 0.119 seconds.